Operating Instructions:
This unit is ready to be hung or set on a flat level surface. Please use the included hanging bracket to suspend the unit in anyway. After the unit has been hung or set in a desired location, plug the unit into main power. After plugging the unit in, the lights will react to the music via the internal sound active microphone. Adjust the sound activation knob on the back of the unit for desired music sensitivity.
A super moonflower effect, the Nitro™ is sound active with 7 multi- colored/gobo combinations. The unit’s internal gobo/color wheel will rotate back and forth to the music. Gobo/color change and wheel rotation will vary depending on the music sensitivity setting. This unit is fan cooled to prolong lamp and motor life.
Lens Focusing:
1.Loosen the thumb screw on the bottom of the unit that holds the lens assembly in place.
2.Adjust the focus by manually sliding the lens back and forth.
3.Tighten the thumb screw after you achieve your desired focus.
Lamp Replacement:
Caution! Never open the unit while it is in use. Always disconnect the main power and allow the unit ample time to cool before attempting to replace the lamp.
1.Be sure to follow the proper procedures when handling halogen bulbs.
2.Lamp replacement has been made simple by incorporating the use of a removable lamp cover and thumb screws.
3.Loosen the thumb screws on the lamp cover.
4.Remove the cover.
5.Remove and replace the lamp.
6.Reassemble.
Always be sure to replace with the exact same type lamp and fuse unless otherwise specified by authorized American DJ® service representative.
Cleaning:
Due to fog residue, smoke, and dust, cleaning the internal and external optical lenses must be carried out periodically to optimize light output. Clean the external optics with glass cleaner and a soft cloth every 30 days. Situation may vary. If used heavily in clubs with lots of fog, clean- ing may be required more often.
Model: NITRO™
SPECIFICATIONS:
Lamp: | |
Power: | 120V/60Hz |
Fuse: | 5A |
Optics: | High Quality Glass Lenses |
Ventilation: | Fan Cooled |
Working Position: | Hanging or set on flat surface |
Weight: | 19 Lbs. |
Size: | 11.5” x 12.5” x 5.5” |
Duty Cycle: | 10 min. on 10 min. off |
©American DJ Supply
American DJ World Headquarters:
4295 Charter Street Los Angeles, CA 90058 USA Tel:
Web: www.americandj.com /
©American DJ Supply® - www.americandj.com - Nitro™ User Instructions Page 3 | ©American DJ Supply® - www.americandj.com - Nitro™ User Instructions Page 4 |