Cross Cooling

ARRI’s cross cooling system moves a stream of air around the Fresnel lens and through the lamphead. In addition, air is channeled through the aluminum extrusion housing reducing lens temperature by 17% and housing

temperatures by 25%. Cross cooling allows ARRI TRUE BLUES to safely

operate at almost any tilt angle.

Patent pending

Stegmaier Connector

We’ve named this component for its inventor and the principal designer of ARRI TRUE BLUES. With this combination connector and strain relief, the power cable can be quickly reoriented for stand mount or hanging fixtures. In addition, the connector, along with ARRI’s new lampholder, allows us to eliminate the interior terminal block.

Patent pending

Sliding Stirrup

Modern fixtures use a wide variety of Chimeras, scrollers and other front mounted accessories. Simply slide ARRI’s unique stirrup bracket to quickly and easily adjust the fixture’s center of gravity.

* Due to the smaller size of the fixture, the sliding stirrup is not used on the T1.

Tilt Lock

ARRI’s new design creates a positive lock so there’s no slippage when using heavy accessories. A stainless steel friction disc functions like a disc brake allowing the lamphead to be completely locked off with a minimum of force.

*Due to the smaller size of the fixture, the friction disc tilt lock is not used on the T1.