Initial Use, Subsequent Use | Broil King NBS-2RT, NBS-3RT, NBS-5RT

HOW TO USE

We recommend that you record the following information for warranty purposes: Model #________

Purchase Date:_____________Dealer:__________________________

Congratulations on your purchase of a BroilKing Buffet Server!

IMPORTANT SAFEGUARDS

To reduce the risk of personal injury or property damage when using electrical appliances, basic safety precautions should always be followed, including the following:

1.READ ALL INSTRUCTIONS BEFORE USE.

2.Do not touch hot surfaces! Always use hot pads or pot holders until unit cools.

3.To protect against electrical shock, do not immerse tray base, cord or plug in water or other liquid.

4.Close supervision is necessary when any appliance is used by or near children.

5.Unplug from outlet when not in use and before cleaning. Allow to cool completely before putting on or taking off parts, and before cleaning or storing the appliance.

6.Do not operate any appliance with a damaged cord or plug or after the appliance malfunctions or has been damaged in any manner. Return the appliance to the BroilKing Factory Service Department

(call 860-738-2200 first) for examination, repair or adjustment.(*Canadian customers contact BroilKing at 860-738-2200 for Canadian Service locations.)

7.The use of accessory attachments not recommended by the appliance manufacturer may cause injuries.

8.Do not use outdoors.

9.Do not let cord hang over edge of table or counter or touch hot surfaces.

10.Do not place on or near a hot gas or electric burner or in a heated oven.

11.It is recommended that this appliance not be moved when it contains hot oil or other hot liquid.

12.Do not clean with metal scouring pads. They can scratch and ruin the finish of your unit.

13.Do not use appliance for other than intended use.

14.DO NOT USE PLASTIC DISHES OR PLASTIC WRAP ON TRAY .

SAVE THESE INSTRUCTIONS

This product is for household use only.

NOTE: A short power supply cord (or cord set) has been provided to reduce the hazards resulting from becoming entangled in or tripping over a longer cord. Longer cord sets or extension cords may be used if care is properly exercised in their use. If a long cord set or extension cord is used, the marked electrical rating of the cord set or extension cord should be at least as great as the electrical rating of the appliance. The longer cord should be arranged so that it will not drape over the counter top or table top where it can be pulled on by children or tripped over accidentally.

The high-tech warming surface will remain unblemished for a long time with appropriate care. The warming surface and high-grade, long-life stainless chafing pans allow for an attractive alternative for keeping appetizers and other foods

warm. For best results use nylon, plastic, wooden or rubber utensils. Metal utensils may be used with care but should not be used to cut food on the cooking surfaces.

Before using for the first time, become familiar with the Buffet Server features, Figure A. Wash removable parts in warm sudsy water, rinse and dry. Clean the warming tray base with a mild detergent and a soft moist cloth. Do not use any scouring agents! DO NOT SUBMERGE THE WARMING BASE OR LET THE PLUG COME IN CONTACT WITH WATER. Rinse and wipe dry. Do not allow water to spill or seep into the frame.

	5 Chafing Pans and 2 Lids (NBS-5RT)l 2 Chafing Pans and 1 Lid (NBS-2RT)
	3 Chafing Pans and 1 Lid (NBS-3RT)
	Chafing Pan Holder	Figure A
	(1 on NBS-2RT	Figure A
	(1 on NBS-2RT
	& NBS-3RT;
	2 on NBS-5RT)
	Warming	Variable
	Warming	Thermostat Knob
	base	Thermostat Knob
	base	(Note: NBS-5RT
		has 2 Knobs)
	Figure B	Signal Light
	Line	(Note: NBS-5RT
		has 2 Lights)

Initial Use:

Heat the warming base without foods on it for approximately 10 minutes at maximum setting in order to seal the special coating. Temporary smoking is normal during initial use.

Subsequent Use:

1.The heating element is equipped with a variable thermostat knob. Heat range is from 1550 to 2000 F, to keep foods at serving temperatures. For best results, use maximum heat setting to quickly reach your desired temperature, then adjust to desired temperature. Set heat level by turning the knob so that the desired knob mark (0=OFF,1, 2, 3) lines up with the signal light line.

2.The light will come on only during heat cycle. Due to the low wattage necessary for warming trays, it can be 20-30 minutes before the light cycles off.

3.You may use the unit either fully assembled with chafing pans, (Figure A) or use the warming base alone as a warming tray (Figure B).

4.If using chafing panes, place the chafing pan holder(s) on the warming base before placing the chafing pans in place.

5.The unit comes with the following stainless chafing pans: Model NBS-3RT:

three 2.6 quart pans; Model NBS-2RT: two 4.3 quart pans; Model NBS-5RT: three 2.6 quart & two 4.3 quart pans . Each 2.6 quart pan will hold about 20 four ounce servings; the 4.3 quart pans each hold over 30 four ounce servings. The clear polypropylene lids have utensil slots.

6.Stainless chafing pans may be used in an oven, but NOT the lids!!!