Buffalo Tools BG8SS Save These Instructions for Future Reference, Important Safety Instructions

Page 5

SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.

This manual contains important information regarding safety, operation, maintenance and storage of this product. Before use, read carefully and understand all warnings, cautions, instructions and labels. Failure to do so could result in serious personal injury, property damage or even death.

IMPORTANT SAFETY INSTRUCTIONS

Before using this tool, you need to become familiar with its operation. If you are unsure about the operation of the tool, or have any questions about its proper use, call the Customer Service Department at

1-888-287-6981. Follow these instructions for safe handling of the tool:

Always secure and support the work piece using clamps. Do not use your hands to hold the piece in place.

Be sure your work area is clean and secure before turning the power switch into the “ON” position. Be sure the area is free from all foreign material, nails, staples, or any other material.

Turn the tool “OFF” and unplug from the power source before making any changes or adjustments to the saw blade.

Do not use solvents containing carbon tetrachloride, ammonia or acetone to clean the saw. Never use gasoline, paint thinner, or other caustic chemicals that can damage the plastic parts of the tool.

Always use the appropriate safety gear when operating this saw. Including but not limited, to goggles, dust mask or respirator. Always work in a well-ventilated area to reduce your exposure to harmful chemicals and dust particles.

Keep hands away from the cutting area.

Do not reach under the work piece.

SPECIFIC SAFETY RULES AND/OR SYMBOLS

SYMBOLS

The following symbols may be used on your tool. Be familiar with and learn the symbols to operate the tool safely.

Symbol

Name

Description

V

Volts

Voltage (Potential)

A

Amperes

Current

Hz

Hertz

Frequency (Cycles per Second)

W

Watt

Power

Kg

Kilograms

Weight

 

Alternating Current

Type of Current

 

Direct Current

Type of Current

 

Alternating or Direct Current

Type of Current

 

Earthing Terminal

Grounding Terminal

 

 

 

 

Class II Construction

Denotes Double Insulation

min

Minutes

Time

s

Seconds

Time

 

Diameter

Size of Drill Bits, Grinding Wheels, etc.

 

No Load Speed

No-load Rotational Speed

 

 

 

…/min

Revolutions per Minute

Revolutions, Surface Speed, Strokes, etc. per Minute

1,2,3…

Ring Selector Settings

Speed, Torque or Position Settings

PACKAGE CONTENTS

Bench Grinder

2 Grinding Wheels (One Course and One Medium) 60 and 120 grit

2 Tool Rests

2 Eye Shields

BG8SS 8 Inch Bench Grinder Assembly & Operating Instructions

5

 

Image 5
Contents BG8SS Features Untrained users Service Specific Safety Rules AND/OR Symbols Important Safety InstructionsPackage Contents Save These Instructions for Future ReferenceComponents AssemblyOperation MaintenanceAccessories Parts List Parts Diagram