Accessories GIE, Accessories Gics | FEIN Power Tools Belt Grinder

Accessories GIE

Steel brush

Ø10" x 2 ⅜" (250 mm × 60 mm), with very high wire strength for especially efficient use, mounting hole, Ø 2" (51 mm).

33 wire gauge / 0.2 mm for thin walled pipes and profiles. 28 wire gauge / 0.35 mm for universal employment. 25 wire strength / 0.5 mm for thick walled pipes and profiles and high deburring effectivity.

Steel model:

Wire gauge / mm	Part Number

33 / 0.20	6 99 02 006 00 0

28 / 0.35	6 99 02 007 00 0

25 / 0.50	6 99 02 008 00 0

Stainless steel model:

Wire gauge / mm	Part Number

36 / 0.20	6 99 02 009 00 0

29 / 0.35	6 99 02 010 00 0

Eye protection

Acrylic screen for protection against sparks, pack of 3

Part Number

3 90 00 000 00 4

Accessories GIBE / GIXBE

Cassette filter

Fits GIBE

Part Number

3 90 00 000 97 6

Cassette filter

Fits GIXBE

Part Number

3 90 00 001 00 5

Accessories GICS

Prism guide GICW

Metal guide (46") for supporting the feed of long pipes, sized

Ø⅜" – 6 ⁵/₁₆" (10 – 160 mm); max. material weight 110lbs

Part Number

6 99 02 179 00 0

Linear guide

Device for exact alignment of the prism guides in horizontal and vertical direction, for direct mounting on the left and right

of the GICS, 2-pack

Part Number

6 99 02 178 00 0

With machine base, for floor mounting, pack of one

Part Number

6 99 02 185 00 0

Extension fitting

to connect 2 prism guides

Part Number

6 99 02 180 00 0

Suppressor

Hold down fixture for light weight small diameter tubing, attaches to prism guide Ø of ⅜" – 6 ⁵/₁₆" (10 – 160 mm)

Part Number

6 99 02 177 00 0

Guide rail, brass

For dry grinding and course material surfaces

Part Number

3 90 00 000 49 6

Guide rail, nylon

For high surface quality

Part Number

3 90 00 000 49 7

Accessories GICS

Cooling lubricant emulsion

Concentrated, 2.6 gal (10 l), mix ratio 1:30, makes 79 gal (300 l) ready coolant

Part Number

6 99 02 100 00 0

Further accessories

Flexible hose

For grinding particle removal,

Ø3 ⁹/₁₆" (90 mm), 3.3 ft (1 m) long, steel, high heat resistance

Part Number

3 90 00 000 00 2

Clamping band

For fastening the flexible hose

Part Number

3 90 00 000 00 3

Swarf bag

For collecting grinding particles, quick and easy attachment

Part Number

6 99 02 005 00 0

Dust collector

Collecting container for grinding particle, plastic, ca. 16" x 12" x 11" (400 × 300 × 285 mm), can also be used as a water container

for catching sparks, capacity about 5.2 gal (20 l)

Part Number

3 90 00 000 48 5

Container with metal lid and flexible hose

Part Number

6 99 02 000 00 0