OPERATIONS
IMPORTANT: KEEP SPARK GUARDS AND EYE SHIELDS IN PLACE AT ALL TIMES.
Figures 23, 24, and 25, illustrate several typical operations that can be accomplished using the grinder. Each tool rest should be positioned a little below the center of the grinding wheel and adjusted so the edge of the tool rest is as close as possible to the grinding wheel for maximum support to the piece that is being ground. This is the most practical and safest position for general work.
As the grinding wheel wears down to a smaller diameter, readjust the tool rest closer to the grinding wheel. Always maintain a distance of 1/8" or less between the grinding wheel and the edge of the tool rest. Free hand grinding without the use of the tool rest should always be done on the lower quarter of the grinding wheel. Please read the “SAFETY RULES” in the front of this manual and follow them while operating this tool.
Fig. 24
Fig. 23
Fig. 25
13