Connections
Portable audio equipment (Cords and equipment not included)
Plug type: | Start playback from the | ➡ | |
Ø3.5 mm | |||
portable audio source. | |||
(1/8") stereo | |||
|
|
Portable audio player
Note
MAIN UNIT
REMOTE
CONTROL
•Adjust the volume and sound quality of this unit and the other equipment. Reduce the level of input signal (for example, by switching off the equalizer or reducing the volume) of the other equipment before connection. High levels of input signal will distort the sound.
•For details, refer to the instruction manual of the other equipment.
|
|
|
|
|
|
|
|
75Ω | LOOP EXT |
|
| ||||
LOOP ANT | |||||||
FM ANT |
| AM ANT | GROUND | ||||
12
AUX
AC IN
3
Headphones (not included)
Reduce the volume level and connect the headphones.
Plug type: Ø3.5 mm (1/8") stereo.
Note
• Avoid listening for prolonged periods of time to prevent hearing damage.
•Excessive sound pressure from earphones and headphones can cause hearing loss.
1Connect the FM indoor antenna.
|
| Adhesive tape | |
|
| FM indoor antenna | |
75 | Ω | T | |
FM AN | |||
| |||
Tape the antenna to a wall or column, in a position with the least amount of interference.
2Connect the AM loop antenna.
1AM loop antenna
2
3
| Use a | |
| screwdriver, etc. | |
Black | Stand the antenna | |
White | ||
up on its base. | ||
Red |
|
RQTX0250 | Click! | |
Keep the loose antenna cord away from other wires and cords. Do | ||
| ||
| not screw too tightly. Otherwise, the screwdriver goes around in | |
| circles and cannot be fixed. |
3Connect the AC power supply cord.
Connect the AC power supply cord after all other connections are complete.
To household 
AC outlet
Note
To save power when the unit is not to be used for a long time, unplug it from the household AC power supply cord. You will need to reset some memory items after plugging in the unit.
Conserving power
The unit consumes approx. 0.08 W even when it is turned off with [8, POWER]. To save power when the unit is not to be used for a long time, unplug it from the household AC outlet. Remember to reset the radio stations and any other memory items before using the unit again.
4