Tool Use and Care, Service | Harbor Freight Tools 94186 guide

14.Do not overreach. Keep proper footing and balance at all times. Proper footing and balance enables better control of the power tool in unexpected situations.

15.Use safety equipment. Always wear eye protection. Dust mask, non-skid safety shoes, hard hat, or hearing protection must be used for appropriate conditions.

Tool Use and Care

16.Do not force the tool. Use the correct tool for your application. The correct tool will do the job better and safer at the rate for which it is designed.

17.Do not use the power tool if the Power Switch does not turn it on or off. Any tool that cannot be controlled with the Power Switch is dangerous and must be replaced.

18.Disconnect the Power Cord Plug from the power source before making any adjustments, changing accessories, or storing the tool. Such preventive safety measures reduce the risk of starting the tool accidentally.

19.Store idle tools out of reach of children and other untrained persons. Tools are dangerous in the hands of untrained users.

20.Maintain tools with care. Keep cutting tools sharp and clean. Properly maintained tools with a sharp cutting edge are less likely to bind and are easier to control. Do not use a damaged tool. Tag damaged tools “Do not use” until repaired.

21.Check for misalignment or binding of moving parts, breakage of parts, and any other condition that may affect the tool’s operation. If damaged, have the tool serviced before using. Many accidents are caused by poorly maintained tools.

22.Use only accessories that are recommended by the manufacturer for your model. Accessories that may be suitable for one tool may become hazardous when used on another tool.

Service

23.Tool service must be performed only by qualified repair personnel. Service or maintenance performed by unqualified personnel could result in a risk of injury.

24.When servicing a tool, use only identical replacement parts. Follow instructions in the “Inspection, Maintenance, And Cleaning” section of this manual. Use of unauthorized parts or failure to follow maintenance instructions may create a risk of electric shock or injury.

Note: Performance of this tool may vary depending on variations in local line voltage. Exten- sion cord usage may also affect tool performance.

SKU 94186

For technical questions, please call 1-800-444-3353

Page 4

94186 specifications

Harbor Freight Tools is well-known for offering a wide range of high-quality tools at affordable prices, appealing to both professionals and DIY enthusiasts. One of their standout products is the Harbor Freight Tools 94186, a versatile tool that has captured the attention of users for its unique features and technological advancements.

The Harbor Freight Tools 94186 is a comprehensive 3-in-1 ultrasonic cleaner designed for cleaning a variety of items, ranging from small engine parts to jewelry. Its main feature is the ultrasonic cleaning technology, which utilizes high-frequency sound waves to produce millions of microscopic bubbles in a cleaning solution. This process, known as cavitation, effectively removes dirt, grease, and grime from surfaces without causing damage to the items being cleaned.

With a large cleaning capacity, the 94186 can handle items as large as 15.2 inches in diameter and up to 9.5 inches tall, making it suitable for a wide range of applications. This size allows users to clean multiple parts at once, streamlining the cleaning process. The unit also features a user-friendly digital display, which ensures precise control over cleaning times and temperature settings. Users can easily set the ultrasonic cleaning time for up to 60 minutes, and the adjustable temperature can range from room temperature to 176 degrees Fahrenheit, enhancing the cleaning effectiveness.

Another notable characteristic of the Harbor Freight Tools 94186 is its robust construction. Built with a stainless-steel tank, the cleaner is designed for durability and resistance to corrosion, ensuring long-term use in various environments. The unit also includes a built-in basket, which helps keep items submerged in the cleaning solution while preventing them from touching the bottom of the tank. This basket design minimizes the risk of damaging delicate items during the process.

In terms of safety, the 94186 is equipped with an automatic shut-off feature that activates when the cleaning cycle is complete, providing peace of mind to users. Its compact size allows for easy storage, making it a perfect addition to any workshop, garage, or home. Overall, the Harbor Freight Tools 94186 stands out as a functional, effective, and reliable ultrasonic cleaner that caters to a diverse array of cleaning needs. Whether you are a busy mechanic, a watch enthusiast, or simply someone who values cleanliness, this tool is designed to make your cleaning tasks easier and more efficient.