Harbor Freight Tools 52848 Save this Manual, Safety Warnings and Precautions, Specifications

PAGE 2

	SPECIFICATIONS
ITEM	DESCRIPTION
Max. Air Pressure	90 PSI
Air Speed	20,000 RPM
Fitting Size	1/4” NPT
Collet Sizes	1/4” 1/8”
Accessories	11 mm Collet Wrench (Qty: 1)
	17 mm Collet Wrench (Qty: 1)
	SAVE THIS MANUAL

You will need this manual for the safety warnings and precautions, operating and maintenance procedures, parts lists and diagrams. Keep your invoice with this manual. Write the invoice number on the inside of the front cover. Keep this manual and invoice in a safe and dry place for future reference.

SAFETY WARNINGS AND PRECAUTIONS

1.KEEP WORK AREA CLEAN AND DRY. Cluttered, damp or wet work areas invite injuries.

2.KEEP CHILDREN AWAY FROM WORK AREA. Do not allow children to handle the Air Angle Die Grinder.

3.STORE IDLE EQUIPMENT. When not in use, the Air Angle Die Grinder should be stored in a dry location to inhibit rust. Always lock up the Air Angle Die Grinder and keep out of reach of children.

4.DO NOT USE THE AIR TOOL KIT IF UNDER THE INFLUENCE OF ALCOHOL OR DRUGS. Read warning labels on prescriptions to determine if your judgement or reflexes are impaired while taking drugs. If there is any doubt, do not attempt to use this product.

5.USE EYE AND HEARING PROTECTION. Wear ANSI approved safety impact eye glasses and ANSI approved hearing protection when working with the Air Angle Die Grinder. ANSI approved safety impact eye glasses and hearing protection are available from Harbor Freight Tools.

6.DRESS SAFELY. Non-skid footwear or safety shoes should be used when working with this product. Do not wear loose clothing or jewelry as they can become caught in moving parts. Wear a protective hair covering to prevent long hair from becoming caught in moving parts. If wearing a long sleeve shirt, roll the sleeves up above the elbows.

7.DO NOT OVERREACH. Keep proper footing and balance at all times to prevent tripping, falling, back injury, etcetera.

SKU 52848