21.Maintenance. For your safety, maintenance should be performed regularly by a quali- fied technician.
22.There are certain applications for which this tool was designed. This tool shall not be modified and/or used for any application other than which it was designed.
23.All accessories must be rated for at least the RPM speed recommended on the tool’s warning label. Wheels and other accessories running over rated speed can fly apart and cause injury.
24.For safe operation, only these accessories can be used with this product:
Abrasive | Flap Wheels |
Wire Brushes | Wire Wheel Brushes |
25.Always use an approved and proper guard when using the above mentioned ac- cessories. Each accessory must have the correct arbor size and must fit properly on the shoulder bushing. Make sure accessories are tightened down securely.
26.NEVER INSTALL A CIRCULAR SAW BLADE FOR USE ONTHIS ANGLE GRINDER. NEVER INSTALL A WOOD CARVING BLADE, CARVING DISC WITH SAW CHAIN CUTTERS, OR A CUTTING CARVING DISC ON THIS ANGLE GRINDER.
27.Warning! Always use an approved and proper guard when using the recom- mended accessories (listed on page 5). Each accessory must have the correct arbor size and must fit properly on the shoulder bushing. Make sure accessories tightened down securely. Never install a carbide tipped or steel circular saw blade for use on this Angle Grinder. Never install a wood carving blade, carving disc with saw chain cutters, or
28.WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other construction activities, contains chemicals known [to the State of Califor- nia] to cause cancer, birth defects or other reproductive harm. Some examples of these chemicals are:
Lead from
Crystalline silica from bricks and cement or other masonry products Arsenic and chromium from chemically treated lumber
Your risk from these exposures varies, depending on how often you do this type of work. To reduce your exposure to these chemicals: work in a well ventilated area, and work with approved safety equipment, such as those dust masks that are specially designed to filter out microscopic particles.
(California Health & Safety Code § 25249.5, et seq.)
29.Warning: The warnings, cautions, and instructions discussed in this instruction manual cannot cover all possible conditions and situations that may occur. It must be understood by the operator that common sense and caution are factors which cannot be built into this product, but must be supplied by the operator.
Note: Performance of this tool (if powered by line voltage) may vary depending on variations in local line voltage. Extension cord usage may also affect tool performance.
SKU 43471 | For technical questions, please call | Page |