Washers | GRINDING WHEEL ASSEMBLY |
(14)Bolt
Shield | (12) | Remove Grinding Wheel | |
Supports |
|
| Eye |
(4) |
|
| |
| Eye |
| Shield (3) |
Nut | Wheel |
| |
Shield |
| ||
(13) | (3) | Cover (6) | Nut (13) |
| Grinding |
Washers | Wheel (2) |
| |
(14) |
|
FIGURE 4 –
Attaching the Eye Shield
to Wheel Cover
2.Remove the BOLT (12) and NUT (13) from the upper grinder housing as shown in Figure 4.
3.Align the EYE SHIELD Assembly with holes and replace the WHEEL COVER BOLT and NUT.
4.Adjust the EYE SHIELD to the de- sired position and tighten the WHEEL COVER NUT.
Bolt
(12)
Spindle
(9)
Wheel | Wheel | |
Mounting | ||
Mounting | ||
Washer (11) | ||
Nut (10) | ||
|
FIGURE 5 – Assembling the Grinder
1.Remove both GRINDING WHEEL COVERS (6) by unscrewing their BOLTS (12) and NUTS (13) as shown in Figure 5.
2.Place adjustable wrenches on both WHEEL MOUNTING NUTS (10).
3.To remove the right hand GRINDING WHEEL (2) turn its WHEEL MOUNT- ING NUT clockwise while keeping the left hand WHEEL MOUNTING NUT stationary. To remove the left hand GRINDING WHEEL turn its WHEEL MOUNTING NUT counterclockwise while keeping the right hand WHEEL MOUNTING NUT stationary.
4.Slide the WHEEL MOUNTING WASHER (11) off of the SPINDLE
(9).
5.Slide the GRINDING WHEEL off of the SPINDLE (9).
SKU 6510 | For technical questions, please call | Page 11 |