6.Make sure your hands and fingers are not touching the grinding wheel or file before starting the unit. Plug in the unit.
7.For maximum safety and control hold the grinder with both hands away from your body. Make sure you do not cover the vents on the Rear Cover (#36). Restricting air flow from the vents could cause the motor to overheat, effecting the overall life of the tool.
Note: Make sure your workpiece is securely clamped down.
8.Holding the unit away from your body, turn the Switch Lever (#20) on. See Figure 4.
Switch Lever (#20)
Figure 4
Workpiece
Gently make contact with your workpiece. Let the tool do the work. Do not force it. Excessive pressure could bend or break the mandrel causing injury. The grinder is designed to run smoothly under load. If it is not running smoothly, you are putting too much pressure on the tool.
SKU 44141 | Page 6 |