SECTION 4: ASSEMBLY
Unpacking
The Model H4378/H4379 is shipped from the manufacturer in a carefully packed carton. If you discover the machine is damaged after you have signed for delivery, immediately call Customer Service for advice.
When you are completely satisfied with the con- dition of your shipment, you should inventory its parts.
Some metal parts may have sharp edges on them after they are formed. Please examine the edges of all metal parts before handling them. Failure to do so could result in injury.
Piece Inventory
After all the parts have been removed from the carton, you should have:
¥Grinder
¥Bolts (4)
¥Washers (6)
¥Knobs (2)
¥Adjustable Rests (2)
¥Eye Shields (2)
¥Spark Breakers (2)
¥Cooling Tray
NOTICE
A full parts list and breakdown can be found toward the end of this manual. For easier assembly, or to identify specific parts, please refer to the detailed illustrations at the end of the manual.
NOTICE
When mounted, the cooling tray can be easi- ly damaged if the grinder is tipped forward.
H4378/H4379 Slimline Bench Grinder |