Grizzly G8793 instruction manual Closure

Page 19

SECTION 8: CLOSURE

The following pages contain general machine data, part diagrams/lists, troubleshooting guide and Warranty/Return information for your Model G8793 Double Disc Sander.

If you need parts or help in assembling your machine, or if you need operational information, we encourage you to call our Service Department. Our trained service technicians will be glad to help you.

If you have comments dealing specifically with this manual, please write to our Bellingham, Washington location using the address in Section 3: General Information. The specifica- tions, drawings, and photographs illustrated in this manual represent the Model G8793 as sup- plied when the manual was prepared. However, due to Grizzly’s policy of continuous improve- ment, changes may be made at any time with no obligation on the part of Grizzly. Whenever pos- sible, though, we send manual updates to all owners of a particular tool or machine. Should you receive one, add the new information to this manual and keep it for reference.

We have included some important safety mea- sures that are essential to this machine’s opera- tion. While most safety measures are generally universal, Grizzly reminds you that each work- shop is different and safety rules should be con- sidered as they apply to your specific situation.

We recommend you keep a copy of our current catalog for complete information regarding Grizzly's warranty and return policy. If you need additional technical information relating to this machine, or if you need general assistance or replacement parts, please contact the Service Department listed in Section 3: General Information.

Additional information sources are necessary to realize the full potential of this machine. Trade journals, woodworking magazines, and your local library are good places to start.

The Model G8793 was specifically designed for sanding. DO NOT MODIFY AND/OR USE

THIS MACHINE FOR ANY OTHER PUR- POSE. Modifications or improper use of this tool will void the warranty. If you are confused about any aspect of this machine, DO NOT use it until you have answered all your ques- tions. Serious personal injury may occur.

Like all power tools, there is danger associ- ated with this machine. Accidents are fre- quently caused by lack of familiarity or fail- ure to pay attention. Use this tool with respect and caution to lessen the possibili- ty of operator injury. If normal safety pre- cautions are overlooked or ignored, seri- ous personal injury may occur.

 

 

 

 

 

 

 

 

 

 

 

 

G8793 12" Double Disc Sander

-17-

Image 19
Contents Double Disc Sander Page Table of Contents Safety Instructions For Power Tools SafetyLength AMP Rating Additional Safety Instructions For The Sander 110V Operation 220V Operation Circuit RequirementsExtension Cords Grounding Commentary General InformationPiece Inventory UnpackingSite Considerations Clean UpMounting To Stand Disc Table AssemblyRemoving protective layer G8793 12 Double Disc Sander Attaching SandpaperTables Miter Gage AdjustmentsTable Tilt OperationsDisc sanding Disc Sanding Miter SandingGeneralTables MaintenanceDust Ports Attaching DiscClosure Machine Data Sheet Symptom Possible Cause Corrective Action TroubleshootingDiagram Flat Washer 5/16 G8793 Disc Sander Parts ListWarranty and Returns Warranty Card Grizzly INDUSTRIAL, INC