Additional Safety Instructions for Mini Grinder
1.READ THIS MANUAL. This manual contains proper operating instructions for this grinder.
2.OPERATION. DO NOT force the grinder against the workpiece. Firmly grasp the grinder and ease it against the workpiece using light pressure.
3.WORK AREA CONDITIONS. DO NOT use this grinder in a damp or wet location. Keep work area well lit. Do NOT use in the presence of flammable gases or liquids.
4.GRINDER DESIGN. DO NOT force this tool beyond its capabilities. DO NOT modify this tool and do not use this grinder for any purpose for which it was not intended.
5.AVOID UNINTENTIONAL STARTING. Be sure the switch is in the OFF position when not in use and before plugging it in. DO NOT carry any tool with your hand on the power switch, whether it is energized or not.
6.SHARP SURFACES. DO NOT place hands near the tooling surfaces of the grinder when in operation.
7.DISCONNECT POWER. Always remove the battery before making any adjust- ment, changing tools, or performing any maintenance to the grinder.
8.MACHINE INSPECTIONS. Perform machine inspections and maintenance service as required.
9.FLEX SHAFT. DO NOT use the flex shaft with a tight bend. This may cause binding and damage the inner spindle.
10.CLAMP THE WORKPIECE. DO NOT hold the workpiece with one hand and operate the grinder with the other.
11.ATTEND TO YOUR GRINDER. Never walk away from the grinder and leave the tool running.
12.TEST RUN. Always test run the grind- er before starting any work.
Like all machinery there is poten- tial danger when operating this machine. Accidents are frequent- ly caused by lack of familiarity or failure to pay attention. Use this machine with respect and caution to lessen the possibility of operator injury. If normal safety precautions are overlooked or ignored, serious personal injury may occur.
No list of safety guidelines can be complete. Every shop environment is different. Always consider safety first, as it applies to your individual working conditions. Use this mini grinder and other machinery with caution and respect. Failure to do so could result in serious personal inju- ry, damage to equipment, or poor work results.
Model H8124 7.2V Mini Grinder Kit |