Push button | Socket for | ||
side | Brush cover | ||
(Spindle lock) | handle | ||
| |||
|
| Switch | |
|
| Lock button | |
Spindle |
| Side handle | |
|
| ||
|
| Across flats | |
Wheel |
|
| |
guard |
| Wheel | |
|
| ||
Wheel |
| washer | |
|
| ||
washer |
|
| |
Depressed |
| Cutting | |
| wheel | ||
center |
| ||
wheel |
|
| |
Wheel |
| Wheel | |
nut |
| nut | |
Wrench
Fig. 3
Wheel washer
Diamond wheel
Wheel nut
MAINTENANCE AND INSPECTION
1.Inspecting the depressed center wheel
Ensure that the depressed center wheel is free of cracks and surface defects.
2.Inspecting the mounting screws
Regularly inspect all mounting screws and ensure that they are properly tightened. Should any of the screws be loose, retighten them immediately. Failure to do so could result in serious hazard.
3.Inspecting the carbon brushes
For your continued safety and electrical shock protection, carbon brush inspection and replacement on this tool should ONLY be performed by a Hitachi Authorized Service Center.
4.Replacing supply cord
If the supply cord of Tool is damaged, the Tool must be returned to Hitachi Authorized Service Center for the cord to be replaced.
5.Maintenance of the motor
The motor unit winding is the very “heart” of the power tool. Exercise due care to ensure the winding does not become damaged and/or wet with oil or water.
6.Service parts list
A:Item No.
B:Code No.
C:No. Used
D:Remarks
CAUTION:
Repair, modification and inspection of Hitachi Power Tools must be carried out by an Hitachi Authorized Service Center.
This Parts List will be helpful if presented with the tool to the Hitachi Authorized Service Center when requesting repair or other maintenance.
In the operation and maintenance of power tools, the safety regulations and standards prescribed in each country must be observed.
MODIFICATIONS:
Hitachi Power Tools are constantly being improved and modified to incorporate the latest technological advancements.
Accordingly, some parts (i.e. code numbers and/or design) may be changed without prior notice.
NOTE:
Due to HITACHI’s continuing program of research and development, the specifications herein are subject to change without prior notice.
4