UnpackingMounting
The Model G1061/G1061Z is shipped from the manufacturer in a carefully packed carton. If you discover the machine is damaged after you have signed for delivery, immediately call Customer Service for advice.
When you are completely satisfied with the con- dition of your shipment, you should inventory its parts.
Some metal parts may have sharp edges on them after they are formed. Please examine the edges of all metal parts before handling them. Failure to do so could result in injury.
Piece Inventory
After all the parts have been removed from the carton, you should have:
•Buffing Unit
•Wheel Flanges (4)
NOTICE
A full parts list and breakdown can be found toward the end of this manual. For easier assembly, or to identify specific parts, please refer to the detailed illustrations at the end of the manual.
The Model G1061/G1061Z weighs approximately 59 lbs. Make sure the workbench on which you plan to mount the buffer is sturdy enough to hold the weight of the machine and any downward pressure that may be applied during operation. The workbench should have a level surface and be heavy, or attached to the floor, so it will not move during operation. To mount the buffer:
1.Pick a spot on the workbench that will allow enough room to move the size of an antici- pated workpiece around the buffer. The oper- ator (and possibly bystanders) should have enough room to stand out of the way in an emergency.
2.Mount the buffer to the workbench with bolts that are long enough to exceed the thickness of your workbench and the buffer base. Secure these bolts with a flat washers, a lock washer and a hex nut. Because sizes vary for each individual situation, the hardware in this step is not included with the Model G1061/G1061Z.
3.Mount the buffer in an area with proper light- ing and near electrical outlets. Lighting should be bright enough to eliminate shadow and prevent eye strain. Electrical circuits should be dedicated or large enough to han- dle amperage requirements. Keep power or extension cords clear of
Make your shop “child safe.” Ensure that your workplace is inaccessible to children by closing and locking all entrances when you are away. Never allow visitors in your shop when assembling, adjusting, or operating equipment.
G1061/G1061Z Buffing System |