Sanyo SC-SC-B555, SC-B550R, SC-B551 manual Dust Indicator

NAME AND FUNCTION OF PARTS (Assemble as indicated in the center illustration.) /

Unclogging the Hose /

When the hose is clogged with dust, remove it in the following manner:

Extension Pipe/

The pipe is adjustable according to the height of the user.

Hose Stopper/

Insert the hose stopper all the way up to the air inlet.

Vacuum Power Adjustment Ring /

The full vacuum power of the cleaner may be too strong in certain cases, for instance when vacuuming curtains and draperies. In

Dust Indicator /

The dust indicator shows the amount of dust that has been collected in the dust compartment. Hold the floor nozzle away from the floor, while operating to check.

1)	Pull out the angled pipe by turning the removal ring in either
	direction.
2)	Use a vinyl garden hose to push out the dust clogging the

(How to expand/contract the pipe)

Adjust the length of the pipe while pushing the button in.

Button

To detach it, press button on the hose stopper and pull the hose toward you.

Connect the angled pipe

these cases, turn the vacuum power adjustment ring (on the hose) to control the vacuum power. Match the hole in the ring with the hose hole to reduce the power.

hose.

3) Insert the angled pipe in place and return the ring to its

original position.

Do not use the hose without the angled pipe in place. If the hose is used without the angled pipe, the hose will bend excessively, causing it to break.

Make sure that you hear a "clicking" sound.

(When the pipe wouldn't expand / contract)

Pull the pipe up hard.

Button

Pull

Insert securely by turning

Vacuum power

adjustment ring

DUST INDICATOR DUST INDICATOR

Vacuuming can continue.	Suction power decreases. Dust compartment
	should be emptied.

Angled pipe

Removal ring /

SC-B555T only/

TURBO CLEANTM /

Change the switch lever according to the area you want to vacuum.

Caution

Please do not place your hand on the extension pipe buttons during operation. Please do push the button in when adjusting the length.

Angled pipe

Hose stopper Button

Hose

Handle

Air inlet

Power Control (only SC-B555/B555T) /

Set the POWER CONTROL to MAX for maximum suction. In the position MIN the suction power is decreased.

Switch /

Start or stop vacuum cleaner by pushing on the switch.

Blower (Exhaust outlet) /

High

The "TURBO CLEAN" turns at a high speed. It is ideal for vacuuming on the rug when the switch lever is selected to this position.

Low

LOW

HIGH

Pipe holder

Use blower to blow dust behind furniture, etc. 1) Insert the hose stopper into the exhaust outlet. 2) Press the switch.

The crevice attachment can be used to blow dust.

The "TURBO CLEAN" turns at a low speed. It is ideal for vacuuming on the floor when the switch lever is selected to this position.

Switch Lever

Floor Nozzle /

Attachments /

Exhaust outlet

Cord Rewind Button /

Caution

Please do not vacuum on the floor while the switch lever is set to "HIGH", as this may damage the floor.

When the dust compartment is full, the TURBO CLEANTM may

The two-way floor nozzle has lever with two positions.

FLOOR:

The head of the brush can rotate.

For vacuuming edges and gaps, and for

To pull the cord back into the unit, press the cord rewind button.

Caution:

Hold the plug when rewinding the cord so that the plug does not damage furniture, hands, the vacuum cleaner or the cord by hitting them.

turn slowly. Please empty the dust compartment.

Warning-To reduce the risk of injury, unplug before connecting the

TURBO CLEANTM .

For vacuuming wooden floors, linoleum or plastic covered floors.

vacuuming fragile or easily scratched items.

Cord and Plug /

Holding the plug will make rewinding smoother.

RUG:

For vacuuming rugs and carpets.

Put the dusting brush

here when not in use.

Pull out the cord and connect the wall outlet.

Do not extend the cord from the unit beyond the red marker line.

Cord rewind button