Harbor Freight Tools 44914 operating instructions REV 02/04

Page 1

1/4 INCH TRIMMER ROUTER

44914

ASSEMBLY AND OPERATING INSTRUCTIONS

Workpiece not included

3491 Mission Oaks Blvd., Camarillo, CA 93011

Visit our Web site at http://www.harborfreight.com

TO PREVENT SERIOUS INJURY,

READ AND UNDERSTAND ALL WARNINGS

AND INSTRUCTIONS BEFORE USE.

Copyright© 2001 by Harbor Freight Tools®. All rights reserved. No portion of this manual or any artwork contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools.

For technical questions and replacement parts, please call 1-800-444-3353

REV 02/04

Image 1
Contents REV 02/04 For technical questions and replacement parts, please callElectrical Safety General Safety RulesSave This Manual Work AreaTool USE and Care Personal SafetyREV 02/04 Specific Safety Rules for Routers ServiceMisuse can Cause Severe Injury Avoid overloading the tool Grounded Tools Tools with Three Prong Plugs GroundingDouble Insulated Tools Tools with TWO Prong Plugs Extension Cords SymbologyRequired Minimum Extension Cord Gauge 110 Volt Unpacking Installing the Router BitOperation Using the Straight Guide Adjusting Cutting DepthAlternative Guide Method Using the Trimmer Guide AssemblyMaking Circle Cuts Best Trimming Routing Direction MaintenanceREV 08/01 Parts ListAssembly Drawing