Global Machinery Company RT300 Attaching the infeed and outfeed fence, Adjusting the mitre gauge

Page 10

the adjustable fence bracket.

Secure the bolt with a flatG washer and a large lock knob

(fig. G).

4.Feed the medium carriage bolt through the channel opening on the left side of the table and through the opening on the left side of the fence. Secure the

bolt with a flat washer and a large lock knob.

Attaching the infeed and outfeed fence

1. Place one sliding panel along

the front side of the fence andH align the channel openings on

the panel with the holes along the front of the fence.

2.Place a small carriage bolt through each of the two openings on the front of the panel and secure each bolt

with a flat washer followed by a small lock knob (fig. H).

3.Repeat steps 1 and 2 to secure the second sliding panel to the fence.

Attaching the guard to the fence

The guard (13) protects the operator from the cutting edge of the router bit. A pin secures the guard to a support on the fence. The guard will move freely when it is attached properly to the fence.

1. Place the arm of the guard

(13) over the support base onI the fence (7) (fig. I).

2.Align the openings on each side of the guard arm with the openings on the support base on the fence.

3. Slide the guard pin through

both sides of the guard armJ and the support base on the

fence (fig. J). Tap gently on the pin if needed to insert it through the support base.

Adjusting the mitre gauge

1. Place the mitre gauge bar into

the channel that runsK the full length of the table.

The bar should run freely in this channel (fig. K).

2.To change the angle of the mitre gauge (14) loosen the mitre gauge lock knob (15) and move the gauge to the desired angle.

3.Tighten the lock knob to set the gauge at the selected angle.

Mounting an R1200 router

The router plate supplied has

L

been designed to suit the

 

GMC R1200, R1250, R2050,

 

MAG1500R and MAG2050R

 

routers.

 

1.If the router plate is attached to the table remove it by loosening the 4 screws (fig. L).

2.Secure the router to the router

plate using 3 x M6 countersink

M

cross head screws (1 x 12mm

 

(for the blind hole), 2 x 16mm)

 

(fig. M).

 

3. Once the router is secured to

 

the router plate place it under

 

the table.

 

10

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Router Contents Introduction Description of symbolsSpecifications Environmental protectionGeneral safety instructions Additional safety rules for router tables Assembly Unpacking Know your product Securing the table to a work bench Attaching the switch boxAttaching the legs Attaching the fence to the tableAttaching the guard to the fence Adjusting the mitre gaugeAttaching the infeed and outfeed fence Mounting an R1200 routerMounting a router other than the R1200 Attaching a table insertAdjusting the fence Adjusting the depth of cutUsing the starting pin OperationMaintenance CleaningPage Page GMC customer assist

RT300 specifications

The Global Machinery Company RT300 is a notable addition to the realm of advanced machinery, specifically designed for diverse industrial applications. Built to meet the rigorous demands of today's manufacturing and construction sectors, the RT300 stands out due to its innovative features, robust technologies, and excellent performance characteristics.

One of the foremost features of the RT300 is its powerful engine configuration. Equipped with a high-efficiency diesel engine, it provides substantial horsepower while maintaining low emissions, adhering to environmental regulations without compromising on performance. This ensures that the RT300 can handle heavy workloads, making it an ideal choice for construction sites, manufacturing plants, and other heavy-duty operations.

The RT300 prides itself on its versatility. Designed with modular attachments, it can be swiftly adapted for various applications - from lifting heavy materials to performing intricate excavation tasks. This adaptability not only streamlines operations but also enhances productivity, allowing companies to maximize their investment in machinery.

Incorporating state-of-the-art technologies, the RT300 features an advanced control system that ensures precision in operation. The user-friendly interface allows operators to manage and monitor the machine with ease, enhancing overall efficiency. Furthermore, real-time diagnostics enable proactive maintenance, reducing downtime and increasing reliability.

Durability is another hallmark of the RT300. Constructed with high-grade materials, it is designed to withstand the rigors of harsh working environments. The robust chassis and reinforced components ensure longevity, which translates into lower operational costs for businesses over time.

Safety is a crucial concern in industrial operations, and the RT300 addresses this with comprehensive safety features. Equipped with an advanced stability control system and multiple sensors, it minimizes risks of accidents while operating on uneven terrain. The ergonomic design of the operator’s cabin also provides improved visibility and comfort, thus enhancing safety while reducing operator fatigue during extended use.

In summary, the Global Machinery Company RT300 represents a significant advancement in industrial machinery. Its powerful engine, versatile attachments, advanced control mechanisms, robust construction, and comprehensive safety features combine to create a reliable and efficient machine. These characteristics make the RT300 a valuable asset for any company looking to enhance its operational capabilities in a competitive landscape.
Top Page Image Contents