Unpacking
Due to modern mass production techniques, it is unlikely that your GMC Power Tool is faulty or that a part is missing. If you find anything wrong, do not operate the tool until the parts have been replaced or the fault has been rectified. Failure to do so could result in serious personal injury.
Carefully remove all parts from the carton and check the contents against the following list:
10. | Mitre gauge |
11. | Mitre gauge lock knob |
12. | Mitre gauge bar |
13. | 32mm table insert |
14. | 47mm table insert (not shown) |
15. | 55mm table insert (not shown) |
16. | Guard pin |
17. | Starting pin |
1.Table top
2.Router plate
3.Left table leg
4.Right table leg
5.Rear fence
6.Adjustable fence bracket
7.Infeed/outfeed fence panels (2)
8.On/off switch box
9.Guard
13
1
2
26
3
8
12 11 10
4
18. | Carriage bolts (1 large, 1 medium, 5 small) |
19. | Flat washers for carriage bolts (7) |
20. | Lock knobs (3 large, 4 small) |
21. | Socket head screws (8) |
22. | Locking washers (8) |
23. | Flat washers (8) |
24. | Nuts (8) |
25. | Philips screws (2) |
26. | Router plate screws (4) |
65
17
7
25 | 7 |
20
19
18
24 |
|
| |
23 |
| 16 | |
22 | 9 | ||
| |||
21 |
|
|
7