Using the template guide
The template guide can be used in various ways:
•Producing duplicates of a particular design of an original shape.
•In conjunction with a template, producing decorative features.
•Repetitive cutting shapes.
If you wish to make your own templates it is best to use a hardwood such as plywood. Use a piece that is just thicker than the depth of the template guide. Allow for the thickness of the guide in your template to ensure that the work piece is cut to the correct size.
1.To attach the template guide (16) turn the router upside down and remove the two fixing screws in the centre of the router base.
2.Insert the template guide into the base of the router and secure using the two fixing screws.
����������
������
��������� ��� ���������
�����
�����������
Maintenance
WARNING. Always ensure that the tool is switched off and the plug is removed from the power point before making any adjustments or maintenance procedures. Always wear sturdy gloves when handling or changing bits as they can be very sharp.
Cleaning
1.Keep the tool’s air vents unclogged and clean at all times.
2.Remove dust and dirt regularly. Cleaning is best done with a rag.
3.
4.Never use caustic agents to clean plastic parts.
CAUTION. Do not use cleaning agents to clean the plastic parts of the router. A mild detergent on a damp cloth is recommended. Water must never come into contact with the router.
Power cord maintenance
If the supply cord needs replacing, the task must be carried out by the manufacturer, the manufacturer’s agent, or an authorised service centre in order to avoid a safety hazard.
Repairs
Only an authorised service centre should replace the cordset or effect other repairs.
11