Freud Tools Router manual Rabbeting Bits with Bearing Set

A

Rabbeting Bits with Bearing Set

Application: Joining boards and letting in back panels with different depths of cut

• With interchangeable bearings to cut rabbets of different depths, these sets produce super smooth cuts on both surfaces of the rabbet.

• 32-504, 32-524, and 32-526 can also be used as flush cutting trim bits.

• Wrench included.

• Cuts all composition materials, plywoods, hardwoods, and softwoods.

• Use on hand-held and table-mounted portable routers.

	Item	Overall		Rabbeting		Carbide	Shank	Overall
	Number	Dia.(D)		Depths		Height(h)	Dia.(A)	Lenght(H)
	32-502 1-3/8"			5/16",3/8",7/16",1/2"		1/2"	1/4"	2-1/4"
	32-504 1-3/8"		flush, 1/8",1/4",5/16",3/8",7/16",1/2"			1/2"	1/4"	2-1/4"
	32-522 1-3/8"			5/16", 3/8", 7/16", 1/2"		1/2"	1/2"	2-1/4"
	32-524	1-3/8"	flush, 1/8",1/4",5/16",3/8",7/16",1/2"			1/2"	1/2"	2-1/4"
H	32-526	1-3/8"	flush, 1/8",1/4",5/16",3/8",7/16",1/2"			3/4"	1/2"	2-1/2"
		1/8"		1/8"	1/4"			1/4"
	h	1/2" Max.				1/2" Max.
	D			3/4" Max.				3/4" Max.
	# 32-504			# 32-526	# 32-504		# 32-526
	# 32-524				# 32-524
		5/16"		5/16"		3/8"		7/16"
		1/2" Max.		3/4" Max.		1/2" Max.		1/2" Max.
	# 32-502			# 32-526	# 32-502		# 32-502
	# 32-504				# 32-504		# 32-504
	# 32-522				# 32-522		# 32-522
	# 32-524				# 32-524		# 32-524
	1/2"		3/8"		7/16"			1/2"
	1/2" Max.			3/4" Max.		3/4" Max.		3/4" Max.
	# 32-502	# 32-526			# 32-526		# 32-526
	# 32-504
	# 32-522		Both Sets Include the Wrench and Step Washers
	# 32-524
	3/8" Bearing #62-102						• Wrench
							#62-402
			Set of				• 1/2" STEP WASHER
	1/2" Bearing #62-104		4	or
							#62-313
	5/8" Bearing #62-113
				Set of
	3/4" Bearing #62-144			7			• 3/8" STEP WASHER
							#62-311
	7/8" Bearing #62-146
	1-1/8" Bearing #62-148						3/8"
							Supplied 3/8" STEP
							WASHER to use when
							mounting 3/8" ball
	1-3/8" Bearing #62-150						bearing only.

Red Item Numbers Indicate 1/2" Shank All Profile Drawings 1:1 Scale

Joinery Bits

159

ROUTER BITS & SETS