Cisco Systems quick start Cisco 805 Series Router Cabling and Setup Quick Start Guide

Page 1

Cisco 805 Series Router Cabling and Setup

Quick Start Guide

This document describes the basic process of cabling and configuring the Internet access device, the Cisco 805 router. For advanced cabling information, refer to the Cisco 805 Router Hardware Installation Guide. For advanced configuration information, refer to the Cisco 805 Router Software Configuration Guide. These documents are available on the Cisco Documentation CD-ROM and on the World Wide Web.

You can access the most current Cisco documentation on the World Wide Web at the following sites:

http://www.cisco.com

http://www-china.cisco.com

http://www-europe.cisco.com

Parts List

The shipment of your Cisco 805 router includes the following items:

One Cisco 805 router

One yellow Ethernet cable

One black power supply

One black power supply cord

800 and SOHO Series Product Documentation CD

Cisco 805 Fast Step CD-ROM

Figure 1 shows the items included with the router. If any of the items is missing or damaged, contact your customer service representative.

Corporate Headquarters:

Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA

Copyright © 2001. Cisco Systems, Inc. All rights reserved.

Image 1
Contents Parts List Cisco 805 Series Router Cabling and Setup Quick Start GuideVerify the PC Setup Verify the PC SetupConnect the Cisco 800 Series Router to a PC Connecting a Cisco 805 Router to a PCFollow these steps to connect the Cisco 805 router to a hub Connect the Cisco 800 Series Router to a HubConnect the Cisco 805 Router to a Serial Device Connecting a Serial Device to a Cisco 805 Router Connecting the Power to an 805 Router Connect the Power and Turn On the RouterLink Verifying the LEDsPC OS About the Product CDMB Dram Using the CD Interface About the Product CD