Ericsson RX8310 manual Sample Configuration Specifications

Page 3

Ericsson RX8310 Distribution Receiver

SAMPLE CONFIGURATION

SPECIFICATIONS

Video and Audio Options

MPEG-2 SD Decode

Profiles: MP@ML

Max video rate: 15 Mbps (MP@ML)

Video format: 480i and 576i 29.97, 25 fps

MPEG-2 HD with Down-conversion

Profiles: MP@HL

Max. video rate: 80 Mbps (MP@HL)

Video format: 1080i at 29.97 and 25 fps 720p at 59.94 and 50 fps

High definition video down-converted and presented as SD only

SD video format: 480i @ 29.97 or 576i @ 25, 50 fps

MPEG-4 AVC SD Decode

Profiles: MP@L3

Max. video rate: 12 Mbps

Video format: 480i and 576i 29.97, 25 fps

MPEG-4 AVC HD with Down-conversion

Profiles: MP@L4, HP@L4

Max. video rate: 20 Mbps

Video format: 1080i @ 29.97 and 25 fps 720p @ 59.94 and 50 fps

High definition video down-converted and presented as SD only

SD video format: 480i @ 29.97 fps or 576i @ 25, 50 fps

Video Processing

Down-conversion (HD to SD)

Aspect ratio conversion (16:9 to 4:3): none, center cut out, letter box, anamorphic - manual/AFD controlled

VBI

Closed captions, DVB Subtitle burn-in

WST, Inverted Teletext, EBU Teletext subtitles and non subtitles, WSS, VITC, VITC in PES, VPS,

VITS, NABTS, AMOL 48, AMOL 96, TV Guide

Audio Decoding

MPEG-1 Layer-II audio

Dolby® Digital 2.0 decoding

Dolby Digital 5.1 down-mix to 2.0

AAC 2.0 decodingy

AAC 5.1 down-mix to 2.0y

Sampling rate: 48 kHz

No. stereo pairs: two

Features

Program selection for ATSC, DVB and MPEG-only streams

Input transport rate up to 160 Mbps (Nominal)

One alarm relay, two relays under SCTE 35 control

Service cycling through all decodable services

Input Interfaces

Transport Stream Input

Format: DVB ASI

Connector: 1x BNC 75 Ohm

Max input rate: 160 Mbps

Packet length: 188/204 byte packets

Standard: EN50083-9

Satellite Input

Connector: 4x F-Type, 75 Ohm

Modulation: DVB-S QPSK, DVB-S2 QPSKy, 8PSKy, 16APSK*y

Frequency range: 950 MHz to 2150 MHz

Input Level: -25 dBm to -65 dBm

Symbol Rate: 1 Msym/s to 45 Msym/s (DVB-S) 1y(5) - 31(60*)Msym/s (DVB-S2)

Bit-rate: 81 (155*) Mbps max. (DVB-S2)

FEC, DVB-S: 1/2, 2/3, 3/4, 5/6, 7/8

FEC, DVB-S2 QPSK: (1/4, 1/3, 2/5*), 1/2, 3/5, 2/3, 3/4, 4/5, 5/6, 8/9, 9/10

FEC, DVB-S2 8PSK: 3/5, 2/3, 3/4, 5/6, 8/9, 9/10

FEC, DVB-S2 16APSK: 2/3, 3/4, 4/5, 5/6, 8/9, 9/10

DVB-S2 FEC Frame: Short Frames*, Normal Frames

LNB Power: 13V, 18V or off, 22 kHz on/off

Standard: EN300 421, EN302 307

Outputs

DVB ASI-C

Connector: 2x BNC 75 ohms

ASI standard: EN50083-9

CVBS

Connector: 2x BNC 75 ohms

Format: NTSC, PAL

Audio

Connector: 2x 9-pin D-type

Analog audio: two balanced stereo pairs

Decoded audio gain adjustment

Output Options

Transport Stream Output

Transport encapsulation into IP

MPTS/IP/UDP

SPTS/IP/UDP with single service filtering - CBR mode

2x GigE outputs, 100/1000 auto-sensing

High Speed Data Output

MPE based data de-encapsulationy

Max. bit rate: 100 Mbps

*Check availability

yIndicates an option

Conditional Access

Director by Ericsson

Single service Director decryption

Multi-service Director decryptiony - up to 24 services

Stream Processing

Single Service filtering

Filter multiple services to one outgoing servicey

Remap PIDs for the filtered service

Output: CBR on ASI and IPy SPTS

Multi-service filtering

Filter N incoming services to M outgoing servicesy

Number of services: 24 max. as 1xMPTS

Re-map PIDs on a single service

Output: CBR on ASI and IPy MPTS

Stream splitting - up to 8 services as IP SPTS

Control

Front panel keypad and LCD

Director by Ericsson remote control

Ethernet

Dual RJ45 10/100baseT control interface

Full SNMP control, Web browser interface

Physical and Power

Dimensions (W x D x H)

440 x 400 x 44mm (17.2 x 15.75 x 1.75“ approx.)

Input Voltage

110 VAC / 240 VAC

Power Consumption

45W max. (depending on options fitted)

Cooling

Integrated fans

Environmental Conditions

Operating Temperature

0°C to 50°C (32° to 122°F)

Storage Temperature

-20°C to 70°C (4° to 140°F)

Relative Humidity

5% to 95% (Non-condensing)

Compliance

CE marked in accordance with EU Low Voltage and EMC Directives

EMC Compliance

EN55022, EN61000-3-210, EN61000-3-310, EN55024, CISPR22, FCC CFR47 Part 15B Class A

Safety Compliance

EN60950-1, IEC60950-1, UL60950-1

Americas

Asia Pacific

Australasia

EMEA

Ericsson Television Inc.

Ericsson Television Limited

Ericsson Television Pty Limited

Ericsson Television Limited

Tel: +1 (678) 812 6300

Tel: +852 2590 2388

Tel: +61 2 9111 4999

Tel: +44 (0)23 8048 4000

Email: tvsalesamericas@ericsson.com

Email: tvsalesapac@ericsson.com

Email: tvsalesanz@ericsson.com

Email: tvsalesemea@ericsson.com

© Ericsson AB. All rights reserved.

www.ericsson.com/television

08-2011-v4

Ericsson maintains a policy of product improvement and reserves the right to modify the specifications without prior notice.

 

 

Image 3
Contents Product Overview Base Unit FeaturesSoftware Options Hardware OptionsSample Configuration Specifications

RX8310 specifications

The Ericsson RX8310 is a cutting-edge radio system that represents a significant advancement in mobile communication technology. Designed to meet the demands of modern networks, it boasts a compact and versatile configuration suitable for a variety of deployment scenarios. This innovative product addresses the needs of both urban and rural environments, making it an essential component of next-generation mobile networks.

One of the standout features of the RX8310 is its support for multiple frequency bands, enabling operators to manage a wide spectrum of mobile communication demands. The device offers advanced capabilities in terms of both coverage and capacity, ensuring that users receive high-quality connectivity regardless of their location. The RX8310 is particularly beneficial in areas with dense populations where network congestion often occurs, as it effectively enhances throughput and connection reliability.

The RX8310 integrates multiple technologies, including massive MIMO (Multiple Input Multiple Output) and beamforming. These technologies significantly improve signal quality and enable more efficient use of available spectrum resources. By utilizing massive MIMO, the RX8310 can handle multiple data streams simultaneously, thus increasing user capacity and improving overall network efficiency.

Another important characteristic of the RX8310 is its energy efficiency. As the telecommunications industry continues to focus on sustainability, the RX8310 contributes to reduced operational costs through lower energy consumption. This energy-efficient design not only helps operators save on electricity bills but also supports environmental goals by lowering the carbon footprint of network operations.

The modular architecture of the RX8310 allows for easy upgrades and scalability, adapting to the evolving demands of 5G and beyond. It is fully compatible with both 4G and 5G technologies, ensuring a seamless upgrade path as operators transition to faster, more advanced networks.

In addition, the RX8310 is equipped with advanced software that supports artificial intelligence and machine learning capabilities. This offers network operators the ability to optimize performance in real time, dynamically adjusting settings based on user demand and network conditions. Overall, the Ericsson RX8310 is a robust solution poised to enhance mobile communication infrastructure, embracing the complexities of modern connected environments while laying the groundwork for future advancements.