Switching on and off, Operation | Global Machinery Company SA350

Unpacking

Due to modern mass production techniques, it is unlikely that your GMC Power Tool is faulty or that a part is missing. If you find anything wrong, do not operate the tool until the parts have been replaced or the fault has been rectified. Failure to do so could result in serious personal injury.

Switching on and off

1. Connect the plug to the power supply.

2. To turn the sander on press the “I” side of the on/off switch (1). To stop the sander press the “O” side of the on/off switch (1).

Note. Do not switch on the tool when the sanding surface is on the work.

Note. Always lift the sander from the work before switching off.

Adjusting the speed

The speed can be adjusted to suit the material being sanded.

1. To adjust the speed, move the variable speed control

(6)until you are satisfied that the speed is what you need for the job in hand.

Adjusting the front handle

The sander has two handles: the main handle (2) with rubber grip and the front handle (7) which can be adjusted to suit the operator’s needs.

1. To adjust the front handle (7) loosen the handle lock (8) enough so that you can easily move the handle into the desired position.

2. Re-tighten the handle lock (8).

Using the sander

The sander is designed for sanding wood, metal, plastic and similar materials. It can be used for sanding back and finishing the surface.

This sander is a handy size for medium jobs.

Operation

1.Switch the sander before you place it on the

workpiece and move it over the surface to be smoothed in a circular motion.

2.Grip the main handle in one hand and push down on the front of the handle with the other hand.

3. Take care to hold the sander parallel to the work, and use only moderate pressure.

4. If there are still marks on your work after sanding, try either going back to a coarser grade and sanding the marks out before recommencing with the original choice of grit, or try using a new piece of sandpaper to eliminate the unwanted marks before going on to a finer grit and finishing the job.

WARNING. Wear safety goggles, a dust mask and ear defenders. The whole sanding pad must rest on the work piece

WARNING. Do not use the sander in wet or damp conditions.

SA350 specifications

The Global Machinery Company SA350 is an advanced piece of construction machinery designed to meet the demands of modern construction projects. Focusing on durability and efficiency, this machine stands out in its category due to a combination of innovative features and cutting-edge technologies.

At its core, the SA350 is powered by a robust engine that delivers a striking balance of power and fuel efficiency. This engine complies with the latest emission standards, ensuring that it meets eco-friendly guidelines while maintaining optimal performance levels. The design boasts an impressive horsepower rating, making it suitable for heavy-duty applications like excavation, grading, and material handling.

One of the key features of the SA350 is its hydraulic system, engineered for high performance and reliability. The hydraulics are supplemented by advanced sensors that provide real-time feedback to the operator, ensuring precise control and responsiveness during operations. This system is designed to enhance productivity, allowing for quick cycle times and reducing operator fatigue.

The operator interface has been thoughtfully designed for ease of use. The cabin is equipped with ergonomic seats, intuitive controls, and a digital display that shows essential information at a glance, such as fuel consumption, hydraulic pressures, and operational status. Visibility is optimized through strategically placed windows, giving operators a clear view of the work site and enhancing safety.

Another standout characteristic of the SA350 is its versatility. The machine can accommodate a variety of attachments, including buckets, blades, and forks, making it adaptable to different tasks. This modular capability allows operators to quickly switch between functions, enhancing operational efficiency on site.

Durability is a central tenet of the SA350’s design. The frame and components are constructed using high-strength materials that withstand the rigors of tough environments, ensuring a long service life. Additionally, the machine undergoes rigorous testing to meet international standards for safety and performance.

In conclusion, the Global Machinery Company SA350 combines power, efficiency, and versatility in a compact footprint. Its advanced features and technologies make it an ideal choice for construction professionals seeking reliability and performance in their machinery. Whether it's for earthmoving, grading, or other applications, the SA350 is engineered to deliver exceptional results while prioritizing operator safety and comfort.