Jet Tools M-628900 operating instructions

Page 5

Warnings

29.Stand to one side of the conveyor and make sure no one else is standing in line with the conveyor while feeding into the machine. The drum sander operates at high speed and should a part slip, it will exit the machine at a high rate of speed and may result in injuries to anyone standing directly in front of the infeed. (Keep the conveyor belt clean and check pin-roll adjustments). Maintain a balanced stance at all times so that you do not fall or lean against the sanding drum or other moving parts. Do not overreach or use excessive force to perform any machine operation.

30.Use the right tool. Don’t force a tool or attachment to do a job for which it was not designed. The right tool will do the job better and safer at the rate for which it was designed.

31.Use recommended accessories; improper accessories may be hazardous.

32.Maintain tools with care. Keep tools sharp and clean for the best and safest performance. Follow instructions for lubricating and changing accessories.

33.Never brush away sawdust while the machine is running. Use the correct speed and feed for the tool. Be sure that the tool is the correct one for your operation.

34.Never stand on a machine. Serious injury could occur if the machine tipped or if the sanding drum is unintentionally contacted.

35.Never leave the machine running unattended. Turn the power off and don’t leave the machine until it comes to a complete stop.

36.All doors should be closed, all panels replaced and other safety guards should be in place before the machine is started or operated.

37.Keep your hands clear when feeding parts onto the conveyor. The part will be forced down as it begins to feed into the machine, causing a pinching action between the part and the table. Use caution! Hands should be clear of the stock and the table to avoid pinching. Never reach into a running machine. Turn off the electrical power and stop the machine before attempting to retrieve parts from within it. Keep your hands away from the sanding area. Contact with internal moving parts can result in the loss or injury to fingers, hands and arms.

38.Remove loose items and unnecessary work pieces from the area before starting the machine.

•ADDITIONAL INFORMATION regarding the safe and proper operation of this product is available from the National Safety Council, 1121 Spring Lake Drive, Itasca, IL 60143-3201, in the Accident Prevention Manual for Industrial Operations and in the safety Data Sheets provided by the NSC. Please also refer to the American National Standards Institute ANSI 01.1 Safety Requirements for Woodworking Machinery and the U.S. Department of Labor OSHA 1910.213 Regulations.

- - SAVE THESE INSTRUCTIONS - -

5

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Part No. M-628900 WMH Tool GroupMore Information WMH Tool Group Warranty Warranty & ServiceTable of Contents Page Page Introduction Specifications Volts Total Length of Cord in Feet Grounding InstructionsVolt Operation Unpacking Contents of the Shipping CartonAssembly and Setup Circuit Breaker On/Off SwitchSwitch Lock This Page Intentionally Left Blank Drum Height Control Conveyor Belt TrackingConveyor Belt Tension Aligning the Drum Fine Tuning Drum AlignmentChecking Drum Alignment Wrapping Abrasive Strips Using the TUF ToolTM Setting the Depth Gauge Connecting Sander to a Dust CollectorSetting the Depth of Cut Establishing the Proper Drum HeightAbrasives Cleaning Abrasive StripsSelecting Drum Abrasives Selecting Abrasive GritsStock Feeding Angle Monthly MaintenanceMultiple-Piece Sanding Runs Edge SandingDrum Height Control Adjustment Conveyor Belt ReplacementTension Roller Pressure Adjustment Tension Roller AlignmentProblem Possible Cause Solution Troubleshooting GuideExploded View 10-20 Plus Sander Parts List for the 10-20 Plus Sander Parts List for the 10-20 Plus Sander Wiring Diagram Vantage Drive Elgin, Illinois Phone

M-628900 specifications

The Jet Tools M-628900 is a high-performance bench grinder designed for both professional and aspiring hobbyists. Renowned for its durability and efficiency, this tool is a staple in workshops seeking precision and quality in their grinding tasks.

One of the standout features of the Jet M-628900 is its powerful motor, which delivers an impressive 1-horsepower output. This capability ensures that the grinder can handle tough materials and heavy-duty tasks without bogging down. The motor runs efficiently, providing a reliable source of power that minimizes downtime during projects.

A key characteristic of the M-628900 is its variable speed control. This feature allows users to adjust the speed according to their specific needs, catering to various applications from sharpening tools to smoothing out rough edges. The speed adjustments can significantly enhance user control and ensure optimal results for different materials, making it versatile for both metalworking and woodworking tasks.

Safety is a top priority in the design of the M-628900. The grinder is equipped with adjustable eye shields that protect users from debris. Additionally, the tool is constructed with a sturdy base that helps minimize vibrations during operation, contributing to a steadier performance and enhancing user safety.

The Jet M-628900 also features industrial-grade wheels, made for durability and longevity. The wheels are easily replaceable, which adds to the grinder's lifespan and usability. This feature is particularly appealing to professionals who require consistency in their tools over extended periods of use.

Moreover, the grinder includes built-in work lights that illuminate the workspace effectively. This enhances visibility, making it easier for users to focus on intricate tasks.

In summary, the Jet Tools M-628900 is a robust and efficient bench grinder that offers a combination of powerful performance, safety features, and user-friendly design. Its variable speed control, durable construction, and thoughtful features make it an essential tool for anyone serious about their grinding needs, whether in a professional setting or a home workshop. With the Jet M-628900, users can expect reliability and precision that enhance their crafting and repair tasks.
Top Page Image Contents