General safety rules

WARNING. Read all instructions. Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury. The term “power tool” in all of the warnings listed below refers to your mains operated (corded) power tool or battery operated (cordless) power tool.

Save these instructions 1. Work area

a. Keep work area clean and well lit. Cluttered and dark

areas invite accidents.

b. Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes.

c. Keep children and bystanders away while operating a power tool. Distractions can cause you to

lose control.

2. Electrical safety

a. Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter plugs with earthed (grounded) power tools. Unmodified plugs and matching outlets will reduce risk of electric shock.

b. Avoid body contact with earthed or grounded surfaces such as pipes, radiators, ranges and refrigerators. There is an increased risk of electric shock if your body is earthed or grounded.

c. Do not expose power tools to rain or wet conditions.

Water entering a power tool will increase the risk of electric shock.

d. Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool.

Keep cord away from heat, oil, sharp edges or moving parts. Damaged or entangled cords increase the risk of electric shock.

e. When operating a power tool outdoors, use an extension cord suitable for outdoor use. Use of a cord suitable for outdoor use reduces the risk of electric shock.

3. Personal safety

a. Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol or medication. A moment of inattention while operating power tools may result in serious personal injury.

b. Use safety equipment. Always wear eye protection.

Safety equipment such as dust mask, non-skid safety shoes, hard hat, or hearing protection used for appropriate conditions will reduce personal injuries.

c. Avoid accidental starting. Ensure the switch is in the off position before plugging in. Carrying power tools with your finger on the switch or plugging in power tools that have the switch on invites accidents.

d. Remove any adjusting key or wrench before turning

the power tool on. A wrench or a key left attached to a rotating part of the power tool may result in personal injury.

e. Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations.

f. Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and gloves away from moving parts. Loose clothes, jewellery or long hair can be caught in moving parts.

g. If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used. Use of these devices

can reduce dust related hazards.

4. Power tool use and care

a. Do not force the power tool. Use the correct power tool for your application. The correct power tool will do the job better and safer at the rate for which it was designed.

OS300 specifications

Global Machinery Company's OS300 is a revolutionary piece of equipment that has taken the industry by storm. Engineered to meet the demanding needs of various sectors, the OS300 has become synonymous with reliability, efficiency, and cutting-edge technology. This article delves into the main features, technologies, and characteristics that set the OS300 apart from its competitors.

At the heart of the OS300 lies its powerful and efficient engine, ensuring optimal performance under diverse operating conditions. The machinery is equipped with advanced fuel management systems that enhance combustion efficiency, resulting in reduced emissions and operating costs. This eco-friendly focus positions the OS300 as a responsible choice for businesses striving to minimize their environmental footprint while maintaining high productivity levels.

One of the standout features of the OS300 is its state-of-the-art automation technology. The machinery incorporates an intelligent control system that allows for real-time monitoring, diagnostics, and adjustments. This not only enhances efficiency but also minimizes downtime, as operators can preemptively address potential issues before they escalate. With user-friendly interfaces and remote monitoring capabilities, the OS300 empowers operators to manage the equipment seamlessly, whether on-site or from a distance.

Durability is also a hallmark of the OS300. Constructed from high-grade materials designed to withstand the harshest conditions, this machinery promises longevity and robustness. Its rugged design, reinforced frames, and corrosion-resistant components ensure that it can operate effectively in various environments, from construction sites to remote industrial settings.

Moreover, the OS300 allows for versatile application across multiple industries. Its modular design facilitates easy customization with interchangeable attachments and tools, making it suitable for different tasks, whether it be excavation, lifting, or material handling. This flexibility not only optimizes productivity but also reduces the need for multiple machines, providing a cost-effective solution for businesses.

In summary, Global Machinery Company's OS300 combines power, efficiency, advanced automation, and rugged durability into a single robust package. With its commitment to sustainability and versatility, the OS300 stands out in the competitive landscape of heavy machinery. As businesses look to modernize their operations, the OS300 emerges as a prime choice, ready to meet the challenges of today and tomorrow.