Safety instructions

WARNING. Read and understand all instructions. Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury. The term “power tool” in all of the warnings below refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool.

Save these instructions

Work area

•Keep work area clean and well lit. Cluttered and dark areas invite accidents.

•Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust. Power tools create sparks which may ignite the dust or fumes.

•Keep children and bystanders away while operating a power tool. Distractions can cause you to lose control.

Electrical safety

•Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter plugs with earthed (grounded) power tools. Unmodified plugs and matching outlets will reduce risk of electric shock.

•Avoid body contact with earthed or grounded surfaces such as pipes, radiators, ranges and refrigerators. There is an increased risk of electric shock if your body is earthed or grounded.

•Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock.

•Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool. Keep cord away from heat, oil, sharp edges or moving parts. Damaged or entangled cords increase the risk of electric shock.

•When operating a power tool outdoors, use an outdoor extension cord suitable for outdoor use. Use of a cord suitable for outdoor use reduces the risk of electric shock.

Personal safety

•Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool while you are tired or under

the influence of drugs, alcohol, or medication. A moment of inattention while operating power tools may result in serious personal injury.

•Use safety equipment. Always wear eye protection. Safety equipment such as a dust mask, non-skid safety shoes, hard hat, or hearing protection used for appropriate conditions will reduce personal injuries.

•Avoid accidental starting. Ensure the switch is in the off-position before plugging in. Carrying power tools with your finger on the switch or plugging in power tools that have the switch on invites accidents.

•Remove any adjusting key or wrench before turning the tool on. A wrench or a key that is left attached to a rotating part of the power tool may result in personal injury.

•Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations.

•Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and gloves away from moving parts. Loose clothes, jewellery or long hair can be caught in moving parts.

•If devices are provided for the connection of dust extraction and collection facilities ensure that these are connected and properly used. Use of these devices can reduce dust-related hazards.

Power tool use and care

•Do not force the power tool. Use the correct power tool for your application. The correct power tool will do the job better and safer at the rate for which it was designed.

•Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be controlled with the switch is dangerous and must be repaired.

BS900M specifications

The Global Machinery Company BS900M is a cutting-edge piece of equipment that has garnered attention in various industrial sectors due to its robust performance and innovative technologies. As a leader in heavy machinery, Global Machinery Company has designed the BS900M to meet the demands of modern construction and manufacturing environments.

One of the standout features of the BS900M is its powerful engine, which allows for exceptional performance and efficiency. The machine is equipped with a high-output diesel engine that delivers unmatched torque and power, enabling it to tackle even the most challenging tasks. Whether it’s lifting heavy loads or performing intricate movements, the BS900M rises to the occasion with ease.

Another key characteristic of the BS900M is its advanced hydraulic system. This system provides precise control over the machine's operations, allowing for smooth and efficient function. The machine's hydraulic components are designed to minimize energy loss and increase performance, making it ideal for applications that require finesse and accuracy.

The BS900M features a state-of-the-art control interface, which enhances user experience and operational efficiency. The intuitive design of the controls enables operators to navigate functionalities with ease, while the digital display provides real-time data on performance metrics. This feature is particularly beneficial for monitoring fuel consumption and operational status, allowing for proactive maintenance and cost management.

In terms of safety, the BS900M is equipped with multiple features designed to protect both the operator and the machine. Safety sensors, emergency stop buttons, and ergonomic design elements contribute to a safe operating environment. These features ensure that even in high-pressure situations, operators can maintain control and confidence.

Durability is another hallmark of the BS900M. Constructed with high-quality materials and components, the machine is built to withstand the rigors of heavy use. Its robust frame and weather-resistant design make it suitable for various environments, from urban construction sites to remote mining locations.

In summary, the Global Machinery Company BS900M combines power, precision, and safety, offering a reliable solution for industries that demand high performance. With its advanced technologies and user-friendly interface, this machinery stands out as a versatile asset for any operation. Its impressive capabilities, durability, and safety features make the BS900M a top choice for professionals in the field.