Global Machinery Company BS1000 instruction manual Cleaning, Repairs

Page 9

Cleaning

1.Keep the tool’s air vents unclogged and clean at all times.

2.Remove dust and dirt regularly. Cleaning is best done with a soft brush or a rag.

3.Re-lubricate all moving parts at regular intervals.

4.If the body of the sander needs cleaning, wipe it with a soft damp cloth. A mild detergent can be used but nothing like alcohol, petrol or other cleaning agent.

5.Never use caustic agents to clean plastic parts.

Caution. Water must never come into contact with the sander.

Repairs

1.Only an authorised service centre should replace the cordset or effect other repairs. If the cordset is damaged or worn, have it repaired or replaced by an authorised service centre.

9

Image 9
Contents Watt Contents Specifications Description of symbolsGeneral safety instructions Dear CustomerLook after your tools. Keep tools sharp and clean for Wear goggles, Wear earmuffs Wear a breathing mask Additional safety rules for sandersUnpacking Cookers and refrigerator enclosuresTracking adjustment knob Dust extraction port AssemblyKnow your product Sander is packed, fully assembledSwitching on and off Attaching a sanding beltSelecting the right grade of sanding belt Dust extraction SandingGeneral inspection Purchase good quality beltsCleaning Never use caustic agents to clean plastic partsRepairs Save this Manual for future reference