OPERATIONS
Read the manual before operation. Become familiar with this tool, its safety instructions, and its operation before beginning any work. Serious personal injury may result if safety or operational information is not understood or followed.
Like all tools there is potential danger when operating this tool. Accidents are frequently caused by lack of familiarity or failure to pay attention. If normal safety precautions are overlooked or ignored, serious personal injury may occur.
To set up the Model H8215 Air Sander:
1.DISCONNECT THE SANDER FROM THE AIR SUPPLY!
2.Firmly holding the orbital shaft, rotate the spindle swivel lock against one of the spindle flats.
3.Thread the sanding pad onto the drive spindle.
4.Install the 1⁄4" NPT male
5.Attach a 6" pressure sensitive adhesive (PSA) sanding disc to the sanding pad, as shown in Figure 2.
Orbital Shaft
Swivel Lock
Figure 2. Attaching sanding disc.
Model H8215 6" Dual Action Air Sander |