INTRODUCTION
Commentary
We are proud to offer the Grizzly Model G9907 Triangular Sander. The Model G9907 is part of a growing Grizzly family of fine power tools. When used according to the guidelines set forth in this manual, you can expect years of
The Model G9907 Triangular Sander is the perfect sander for detailed sanding tasks and hard to reach corners. The pad rotates at 8,000 orbits per minute with a .040" eccentric motion for a finish without scratches. Sanding pads have a 61⁄4 square inch surface area, with flow through holes to direct dust to the 11⁄4" dust port. Pads are easily changed with the
We are pleased to provide this manual with the Model G9907. It was written to encourage safety considerations and guide you through general operating pro- cedures and maintenance. It represents our effort to produce the best documenta- tion possible.
The specifications, details, and pho- tographs in this manual represent the Model G9907 as supplied when the manu- al was prepared. However, owing to Grizzly’s policy of continuous improve- ment, changes may be made at any time with no obligation on the part of Grizzly. If you have any comments regarding this manual, please write to us at the address below:
Grizzly Industrial, Inc.
C/O Technical Documentation
P.O. Box 2069
Bellingham, WA
G9907 Triangular Sander
Most importantly, we stand behind our tools. If you have any service questions or parts requests, please call or write us at the location listed below.
Grizzly Industrial, Inc.
2406 Reach Road
Williamsport, PA 17701
Phone: (570)
Fax: (800)
Web Site: http://www.grizzly.com
To operate this, or any power tool, safely and efficiently, it is essential to become as familiar with its character- istics as possible. The time you invest before you begin to use your Model G9907 will be time well spent. DO NOT operate this machine until you are competely familiar with the contents of this manual. Make sure you read and understand all of the safety proce- dures. If you do not understand some- thing, DO NOT operate the machine.