Grizzly G1015 instruction manual Length AMP Rating

Page 4

Safety Instructions For Power Tools

9.USE PROPER EXTENSION CORD. Make sure your extension cord is in good condi- tion. Conductor size should be in accor- dance with the chart below. The amperage rating should be listed on the motor or tool nameplate. An undersized cord will cause a drop in line voltage resulting in loss of power and overheating. Your extension cord must also contain a ground wire and plug pin. Always repair or replace exten- sion cords if they become damaged.

Minimum Gauge for Extension Cords

 

 

LENGTH

 

AMP RATING

25ft

 

50ft

 

100ft

0-6

18

 

16

 

16

7-10

18

 

16

 

14

11-12

16

 

16

 

14

13-16

14

 

12

 

12

17-20

12

 

12

 

10

21-30

10

 

10

 

No

 

 

 

 

 

 

10.WEAR PROPER APPAREL. Do not wear loose clothing, gloves, neckties, rings, bracelets, or other jewelry which may get caught in moving parts. Non-slip footwear is recommended. Wear protective hair cov- ering to contain long hair.

11.ALWAYS USE SAFETY GLASSES. Also use face or dust mask if cutting operation is dusty. Everyday eyeglasses only have impact resistant lenses, they are NOT safe- ty glasses.

12.SECURE WORK. Use clamps or a vise to hold work when practical. It’s safer than using your hand and frees both hands to operate tool.

13.DON’T OVERREACH. Keep proper foot- ing and balance at all times.

14.MAINTAIN TOOLS WITH CARE. Keep tools sharp and clean for best and safest performance. Follow instructions for lubri- cating and changing accessories.

15.DISCONNECT TOOLS before servicing and changing accessories, such as blades, bits, cutters, and the like.

16.REDUCE THE RISK OF UNINTENTION- AL STARTING. Make sure switch is in off position before plugging in.

17.USE RECOMMENDED ACCESSORIES.

Consult the owner’s manual for recom- mended accessories. The use of improper accessories may cause risk of injury.

18.CHECK DAMAGED PARTS. Before fur- ther use of the tool, a guard or other part that is damaged should be carefully checked to determine that it will operate properly and perform its intended function. Check for alignment of moving parts, bind- ing of moving parts, breakage of parts, mounting, and any other conditions that may affect its operation. A guard or other part that is damaged should be properly repaired or replaced.

19.NEVER LEAVE TOOL RUNNING UNAT- TENDED. TURN POWER OFF. Don’t leave tool until it comes to a complete stop.

G1015 Knife Belt Sander/Buffer

-4-

Image 4
Contents Knife Belt SANDER/BUFFER Table Of Contents Safety Safety Instructions For Power ToolsLength AMP Rating Additional Safety Instructions For Sanders Fusing Circuit Requirements110V Operation Grounding Extension CordsIntroduction CommentaryUnpacking Parts Inventory Clean Up Site ConsiderationAssembly Mounting BaseMotor Pivot ArmPivot arm adjustment Drive WheelUpper Arm Assembly Sanding Belt ShoeBelt Installation Tool RestAdjustments Belt TensionBelt Tracking See FigureTest Run Belt SandingTypical knife sharpening technique Buffing & Polishing Buffing on the bottom of the wheelAccessory Removal Drum SandingMaintenance GeneralLubrication Belts and DrumsClosure Troubleshooting Motor Troubleshooting Other Warranty and Returns

G1015 specifications

The Grizzly G1015 is a versatile and powerful tool designed for woodworkers and craftsmen. With its robust design and user-friendly features, it has become a popular choice for both hobbyists and professionals alike. This bandsaw is particularly well-suited for those looking to take their woodworking projects to the next level.

One of the main features of the Grizzly G1015 is its powerful 1-horsepower motor, which offers ample cutting power for a variety of materials. This ensures that users can tackle both softwoods and hardwoods with ease, providing versatility for different woodworking applications. The motor is also equipped with a 115V power supply, making it suitable for most standard electrical outlets.

The saw boasts a 14-inch throat depth and a height of 6 inches, allowing for the cutting of larger workpieces while maintaining precision. The high-quality blade guides, constructed from perfectly machined aluminum, help ensure straight cuts by stabilizing the blade during operation. The G1015 can accommodate blade widths ranging from 1/8 inch to 3/4 inch, offering users flexibility to choose the right blade for their specific cutting needs.

Another key characteristic of the G1015 is its well-designed frame and base. Made from heavy-duty steel, the construction minimizes vibrations and ensures stability during use. This results in improved cut accuracy and a smoother operation overall. Additionally, the built-in dust port enhances cleanup convenience, allowing users to connect a shop vacuum for efficient dust collection.

Safety features are also a priority with the Grizzly G1015. The saw is equipped with a large on/off switch, making it easy to operate while keeping hand placement in mind. Furthermore, the blade tension release mechanism allows for quick adjustments, ensuring users can maintain optimal blade tension for various cutting tasks.

The Grizzly G1015 stands out in the market due to its combination of power, precision, and user-friendly features. With its ability to handle a wide variety of woodworking projects and its thoughtfully designed construction, it is a valuable addition to any workshop. Whether you are making intricate cuts or resawing lumber, the G1015 provides the tools necessary to achieve professional results with each project.