Conveyor |
|
Type | TEFC Capacitor Start Induction |
Horsepower | 1 HP |
Voltage | 220V |
Prewired | 220V |
Phase | Single |
Amps | 7A |
Speed | 1725 RPM |
Cycle | 60 Hz |
Number Of Speeds | Variable |
Power Transfer | |
Bearings | Sealed and Lubricated |
Main Specifications: |
|
Operation Information |
|
No Of Sanding Drums | 1 |
Maximum Board Width |
|
Minimum Board Width | 2 in. |
Maximum Board Thickness | 6 in. |
Minimum Board Thickness | 1/8 in. |
Minimum Board Length | 14 in. |
Sanding Belt Speed | 2600 FPM |
Sanding Belt Oscillations | 5/8 - 3/4 in. |
Sanding Drums Speed | 2600 FPM |
Conveyor Feed Rate | 15 - 49 FPM |
Sanding Belt Length | 60 in. |
Sanding Belt Width | 37 in. |
Drum Information |
|
Infeed Sanding Drum Type | Rubber |
Infeed Sanding Drum Size | 4 in. |
Outfeed Sanding Drum Type | Steel |
Outfeed Sanding Drum Size | 3 in. |
Platen Information |
|
Platen Type | Graphite/Felt |
Platen Length | 37.8 in. |
Platen Width | 3.5 in. |
Construction |
|
Conveyor Belt Construction | Rubber |
Body Construction | Steel |
Base Construction | Steel |
Paint | Epoxy |
Other Related Information |
|
Floor To Belt Height | 32 in. |
Belt Tracking | Pneumatic |
Sanding Belt Tension | Pneumatic |
No Of Pressure Rollers | 2 |
Pressure Roller Type | Rubber |
Pressure Roller Size | 1.96 in. |
Conveyor Belt Length | |
Conveyor Belt Width | |
Belt Roller Size | 4 in. |
No Of Dust Ports | 3 |
Dust Port Size | 4 in. |
Air Requirement | 75 PSI |
Model G0571 | The information contained herein is deemed accurate as of 10/7/2008 and represents our most recent product specifications. | PAGE 2 OF 3 |
Due to our ongoing improvement efforts, this information may not accurately describe items previously purchased. |