Harbor Freight Tools 93431 Symbology Unpacking, Assembly Instructions Attaching the Dust BAG

Page 10

SYMBOLOGY

UNPACKING

When unpacking, check to make sure that the item is intact and undamaged. If any parts are missing or broken, please call Harbor Freight Tools at the number shown on the cover of this manual as soon as possible.

ASSEMBLY INSTRUCTIONS

NOTE: For additional information regarding the parts listed in the following pages, refer to the Assembly Diagram on page 13.

CAUTION: Always make sure the Power Cord (13) of the Sander is unplugged from its electrical outlet prior to making any adjustments or doing servicing, or adding or remov- ing sanding discs.

ATTACHING THE DUST BAG (28)

1.Slide the Dust Bag (28) onto the back of the Sander. pressure.

2.The collection of the dust will only work if the sandpaper has holes that line up with the 8 dust collection holes in the Backing

Pad (23). There are 4 other holes in the Backing Pad for the Screws

(26)that attach the Backing Pad to the Sander.

Snap it in place using firm

Dust Bag (28)

Backing Pad (23)

SKU 93431

For technical questions, please call 1-800-444-3353.

Page 10

Image 10
Contents For technical questions and replacement parts, please call Random Orbital Palm SanderWork Area General Safety RulesSave this Manual E194601Electrical Safety Personal SafetyTool USE and Care Service Specific Safety RulesPage Grounded Tools Tools with Three Prong Plugs GroundingSKU For technical questions, please call Double Insulated Tools Tools with TWO Prong Plugs Figure BExtension Cords See Figure CSymbology Unpacking Assembly Instructions Attaching the Dust BAGOperating Instructions Parts List INSPECTION, MAINTENANCE, and CleaningDo not use damaged equipment Assembly Diagram