Harbor Freight Tools 2485 manual Personal Safety

Page 3

or modify the plug in any way. Do not use any adapter plugs. Check with a quali- fied electrician if you are in doubt as to whether the outlet is properly grounded.

If the tools should electrically malfunction or break down, grounding provides a low resistance path to carry electricity away from the user.

2.Double insulated tools are equipped with a polarized plug (one blade is wider than the other). This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician to install a polarized outlet. Do not change the plug in any way. Double insulation eliminates the need for the three wire grounded power cord and grounded power supply system.

3.Avoid body contact with grounded surfaces such as pipes, radiators, ranges, and refrigerators. There is an increased risk of electric shock if your body is grounded.

4.Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock.

5.Do not abuse the Power Cord. Never use the Power Cord to carry the tools or pull the Plug from an outlet. Keep the Power Cord away from heat, oil, sharp edges, or moving parts. Replace damaged Power Cords immediately. Damaged Power Cords increase the risk of electric shock.

6.When operating a power tool outside, use an outdoor extension cord marked “W-A” or “W”. These extension cords are rated for outdoor use, and reduce the risk of electric shock.

Personal Safety

1.Stay alert. Watch what you are doing, and use common sense when operating a power tool. Do not use a power tool while tired or under the influence of drugs, alcohol, or medication. A moment of inattention while operating power tools may result in serious personal injury.

2.Dress properly. Do not wear loose clothing or jewelry. Contain long hair. Keep your hair, clothing, and gloves away from moving parts. Loose clothes, jewelry, or long hair can be caught in moving parts.

3.Avoid accidental starting. Be sure the Power Switch is off before plugging in. Carrying power tools with your finger on the Power Switch, or plugging in power tools with the Power Switch on, invites accidents.

4.Remove adjusting keys or wrenches before turning the power tool on. A wrench or a key that is left attached to a rotating part of the power tool may result in personal injury.

5.Do not overreach. Keep proper footing and balance at all times. Proper footing and balance enables better control of the power tool in unexpected situations.

6.Use safety equipment. Always wear eye protection. Dust mask, nonskid safety shoes, hard hat, or hearing protection must be used for appropriate conditions. Always

SKU 02485

For technical questions, please call 1-800-444-3353.

Page

Image 3
Contents Belt Sander 1 X 30 Inches For technical questions or replacement parts, please callWork Area SpecificationsElectrical Safety Save This ManualPersonal Safety Tool Use And Care ServiceSKU For technical questions, please call Prong Plug and Outlet Outlets for 2-Prong Plug Grounded Tools Tools With Three Prong PlugsDouble Insulated Tools Tools With Two Prong Plugs Plug and Outlet120 or 240 Volt Extension CordsFeet See Table aUnpacking SymbologyAssembly Sanding OperationAdjusting Table Angle Removing and Installing Sanding BeltLeveling the Table Adjustment of Belt Support Adjusting the Sanding Belt TrackingMaintenance Parts List Record Product’s Serial Number HerePart Description ’ty Assembly Diagram Wiring Diagram Limited 90 day/1 Year warranty