Makita BO4551 instruction manual Operation, Maintenance

Page 7

 

003319

1

3

2

 

4

5

1.Protrusion

2.Dust spout

3.Dust bag

4.Entry port

5.Hole

Dust bag

The use of the dust bag makes sanding operations clean and dust collection easy. To attach the dust bag, fit the bag’s entry port onto the dust spout on the tool. Make sure that the hole in the bag’s entry port is just over the pimple-like protru- sion on the dust spout.

For the best results, empty the dust bag when it becomes approximately half full, tapping it lightly to remove as much dust as possible.

OPERATION

 

003335

Sanding operation

 

CAUTION:

 

• Never run the tool without the abrasive paper. You may

 

seriously damage the pad.

 

• Never force the tool. Excessive pressure may decrease

 

the sanding efficiency, damage the abrasive paper or

 

shorten tool life.

 

Hold the tool firmly. Turn the tool on and wait until it attains

 

full speed. Then gently place the tool on the workpiece sur-

 

face. Keep the pad flush with the workpiece and apply slight

 

pressure on the tool.

MAINTENANCE

CAUTION:

Always be sure that the tool is switched off and unplugged before attempting to perform inspection or maintenance.

To maintain product SAFETY and RELIABILITY, repairs, carbon brush inspection and replacement, any other mainte- nance or adjustment should be performed by Makita Autho- rized or Factory Service Centers, always using Makita replacement parts.

7

Image 7
Contents Finishing Sander Work Area Electrical SafetyTool Use and Care Personal SafetySpecific Safety Rules Page Functional Description AssemblyOperation MaintenanceAccessories Makita Canada Inc Forbes Street Whitby, Ontario L1N 7B7 Your answers to the following questions are appreciated When you need service Factory Service CentresMakita Limited ONE Year Warranty