DUSTLESS | SANDING | ,_ | WARNING: | To prevent the possibility of sanding | ||
|
| |||||
See Figures | 3 and 4. |
| dust or foreign | objects being thrown into your face | ||
The dust bag assembly provides a dust collection |
| or eyes, never attempt to use your sander without | ||||
| the dust bag properly installed. Sanding dust or | |||||
system for your sander. It can be installed by slipping it |
| |||||
| foreign objects being thrown into your face could | |||||
over the blower exhaust with a twisting motion. |
| |||||
| result in possible serious personal injury. | |||||
Sanding dust is drawn up through the holes of the |
| |||||
|
|
|
| |||
sanding disc to collect in the dust bag during sanding | A'R'ACHING SANDER TO VACUUM | |||||
operation. |
| |||||
| When sanding for an extended period of time, you can | |||||
Note: For more efficient operation, empty dust bag | ||||||
easily attach the dust collection system of your sander | ||||||
when no more than half full. This will permit the air to | ||||||
to a vacuum. |
| |||||
flow through the bag better. |
| |||||
TO ATTACH: |
| |||||
|
|
| ||||
SANDER |
| See Figure | 5. |
| ||
|
| • | Unplug | your sander. | ||
,_k WARNING: Failure to unplug your sander could result in accidental starting causing possible
serious personal injury.
• Remove dust bag from sander.
• Attach vacuum hose to blower exhaust as shown in Figure 5.
Note: Vacuum hose fits inside blower exhaust.
DUSTBAG
BLOWEREXHAUST Fig. 3
BLOWEREXHAUST Fig. 4
VACUUMHOSE | Fig. 5 |
•Connect sander and vacuum to power supply.
A WARNING: When sander is not connected to vacuum, always install dust bag back on sander. Failure to do so could cause sanding dust or foreign objects to be thrown into your face or eyes which could result in possible serious injury.
A WARNING: Do not wear loose clothing or jewelry when operating sander. They could get caught in moving parts causing serious injury. Keep head away from sander and sanding area. Hair could be drawn into sander causing serious injury.