Product Configuration/Specifications: 12,000 RPM Random Orbital Sander
|
|
| Note: All Vacuum machines use Ø 28 mm (1 in.) Vacuum Hose Fittings. |
|
|
| |||||||
|
| Vacuum |
| Pad Size | Model | Pad Part | Product Net Wt | Height mm | Length mm | *Noise Level | **Vibration | **Uncertainty | |
Orbit | Pad Face | Pad Type | dBA Pressure | Level m/s2 | K | ||||||||
|
| Type |
| mm (in) | Number | Number | kg | (lb) | (in) | (in) | (Power) | (ft/s2) | m/s2 |
| Stikit™ | Non | Low Profile | 127 (5) | 20320 | 20351 | 0.72 | (1.59) | 82.9 (3.26) | 148.4 (5.84) | 77 (83) | 3.1 (10.2) | 1.55 |
| Vacuum | 150 (6) | 20328 | 20354 | 0.76 | (1.68) | 82.9 (3.26) | 161.1 (6.34) | 83 (89) | 3.3 (10.8) | 1.65 | ||
|
|
| |||||||||||
|
| Central | Clean | 127 (5) | 20321 | 20353 | 0.78 | (1.72) | 84.5 (3.33) | 209.5 (8.25) | 77 (83) | 3.1 (10.2) | 1.55 |
2.5 mm |
| 150 (6) | 20329 | 20356 | 0.83 | (1.83) | 84.5 (3.33) | 222.2 (8.75) | 83 (89) | 3.3 (10.8) | 1.65 | ||
| Vacuum | Sanding | |||||||||||
(3/32 in) | Hookit™ |
|
| 150 (6) | 20463‡ | 20465 | 0.83 | (1.83) | 84.5 (3.33) | 222.2 (8.75) | 83 (89) | 3.3 (10.8) | 1.65 |
| Clean | 127 (5) | 20322 | 20353 | 0.80 | (1.76) | 84.5 (3.33) | 217.9 (8.58) | 84 (95) | 3.1 (10.2) | 1.55 | ||
|
| ||||||||||||
|
| 150 (6) | 20330 | 20356 | 0.86 | (1.90) | 84.5 (3.33) | 230.6 (9.08) | 83 (92) | 3.1 (10.2) | 1.55 | ||
|
| Vacuum | Sanding | ||||||||||
|
| 150 (6) | 20464‡ | 20465 | 0.86 | (1.90) | 84.5 (3.33) | 230.6 (9.08) | 83 (92) | 3.1 (10.2) | 1.55 | ||
|
|
|
| ||||||||||
| Stikit™ |
|
| 127 (5) | 20317 | 20351 | 0.75 | (1.65) | 82.9 (3.26) | 149.6 (5.89) | 80 (88) | 3.2 (10.5) | 1.60 |
| Non | Low Profile | 150 (6) | 20325 | 20354 | 0.79 | (1.74) | 82.9 (3.26) | 162.3 (6.39) | 79 (83) | 3.3 (10.8) | 1.65 | |
|
| ||||||||||||
| Hookit™ | Vacuum | 127 (5) | 20457‡ | 20352 | 0.75 | (1.65) | 82.9 (3.26) | 149.6 (5.89) | 80 (88) | 3.2 (10.5) | 1.60 | |
|
| ||||||||||||
|
|
| 150 (6) | 20460‡ | 20355 | 0.79 | (1.74) | 82.9 (3.26) | 162.3 (6.39) | 79 (83) | 3.3 (10.8) | 1.65 | |
|
|
|
| ||||||||||
|
|
| Clean | 127 (5) | 20318 | 20353 | 0.81 | (1.79) | 84.5 (3.33) | 210.8 (8.30) | 81 (88) | 3.2 (10.5) | 1.60 |
| Hookit™ |
| 150 (6) | 20326 | 20356 | 0.86 | (1.90) | 84.5 (3.33) | 223.5 (8.80) | 77 (85) | 3.3 (10.8) | 1.65 | |
| Central | Sanding | |||||||||||
5 mm |
| 150 (6) | 20461‡ | 20465 | 0.86 | (1.90) | 84.5 (3.33) | 223.5 (8.80) | 77 (85) | 3.3 (10.8) | 1.65 | ||
|
| ||||||||||||
| Vacuum |
| |||||||||||
(3/16 in) | Stikit™ |
| Low Profile | 127 (5) | 20455‡ | 20442 | 0.81 | (1.79) | 84.5 (3.33) | 210.8 (8.30) | 81 (88) | 3.2 (10.5) | 1.60 |
|
| 150 (6) | 20458‡ | 20454 | 0.86 | (1.90) | 84.5 (3.33) | 223.5 (8.80) | 77 (85) | 3.3 (10.8) | 1.65 | ||
|
|
|
| ||||||||||
| Stikit™ | Low Profile | 127 (5) | 20456‡ | 20442 | 0.83 | (1.83) | 84.5 (3.33) | 219.2 (8.63) | 85 (93) | 3.2 (10.5) | 1.60 | |
| Vacuum | 150 (6) | 20459‡ | 20454 | 0.89 | (1.96) | 84.5 (3.33) | 231.9 (9.1) | 83 (92) | 3.3 (10.8) | 1.65 | ||
|
|
| |||||||||||
|
| Clean | 127 (5) | 20319 | 20353 | 0.83 | (1.83) | 84.5 (3.33) | 219.2 (8.62) | 85 (93) | 3.2 (10.5) | 1.60 | |
| Hookit™ | 150 (6) | 20327 | 20356 | 0.89 | (1.96) | 84.5 (3.33) | 231.9 (9.1) | 83 (92) | 3.3 (10.8) | 1.65 | ||
| Vacuum | Sanding | |||||||||||
|
| 150 (6) | 20462‡ | 20465 | 0.89 | (1.96) | 84.5 (3.33) | 231.9 (9.1) | 83 (92) | 3.3 (10.8) | 1.65 | ||
|
|
|
| ||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Stikit™ | Non | Low Profile |
| 20253 | 20351 | 0.76 | (1.68) | 82.9 (3.26) | 150.37 (5.92) | 74 (83)) | <2.5 (<8.2) | N/A |
| Vacuum |
| |||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
| |
|
| Central |
| 127 (5) | 20254/ |
| 0.82 | (1.81) | 82.9 (3.26) | 212.08 (8.35) | 77 (85) | <2.5 (<8.2) | N/A |
|
| Vacuum | Clean | †63378 |
| ||||||||
| Hookit™ |
| 20353 |
|
|
|
|
|
|
| |||
| Sanding |
| 20255/ | 0.84 | (1.85) | 82.9 (3.26) | 220.66 (8.68) | 91 (99) | <2.5 (<8.2) | N/A | |||
|
|
|
| ||||||||||
|
| Vacuum |
|
| †63379 |
| |||||||
8 mm |
|
|
|
|
|
|
|
|
|
|
| ||
| Non |
|
|
|
|
|
|
|
|
|
|
| |
(5/16 in) | Stikit™ | Low Profile |
| 20324 | 20354 | 0.79 | (1.74) | 82.9 (3.26) | 163.42 (6.45) | 77 (85) | 3.3 (10.8) | 1.65 | |
Vacuum |
| ||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
| |
|
| Central |
| 150 (6) | 20213 | 20356 | 0.87 | (1.92) | 82.9 (3.26) | 224.8 (8.85) | 75 (85) | 3.5 (11.4) | 1.75 |
| Hookit™ | Vacuum | Clean | 63373† | 20465 | 0.87 | (1.92) | 82.9 (3.26) | 224.8 (8.85) | 75 (85) | 3.5 (11.4) | 1.75 | |
| Sanding |
| 20208 | 20356 | 0.90 (1.98) | 82.9 (3.26) | 233.4 (9.18) | 82 (92) | 3.4 (11.1) | 1.70 | |||
|
|
| |||||||||||
|
| Vacuum |
|
| 63372† | 20465 | 0.90 (1.98) | 82.9 (3.26) | 233.4 (9.18) | 82 (92) | 3.4 (11.1) | 1.70 | |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
†Available only in Europe.
‡ Available only in APAC.
* Declared noise levels; measurements carried out in accordance with standard EN ISO 15744:2008.
** Declared vibration levels in accordance with EN12096; measurements carried out in accordance with standard EN ISO
IMPORTANT NOTE: The noise and vibration values stated in the table are from laboratory testing in conformity with stated codes and standards and are not sufficient risk evaluation for all exposure scenarios. The actual exposure values and amount of risk or harm
experienced to an individual is unique to each situation and depends upon the surrounding environment, the way in which the individual
works, the particular material being worked, work station design, as well as upon the exposure time and the physical condition of
the user. 3M™ cannot be held responsible for the consequences of using declared values instead of actual exposure values for any
individual risk assessment.
Operating / Maintenance Instructions
PRIOR TO THE OPERATION
The tool is intended to be operated as a hand held tool. It is always recommended that while using the tool, operators stand on a solid floor, in a secure position with a firm grip and footing. Be aware that the sander can develop a torque reaction. See the section
“SAFETY PRECAUTIONS”.
Use a clean lubricated air supply that will give a measured air pressure at the tool of 6.2 bar (90 psig) when the tool is running with the lever fully depressed. It is recommended to use an approved 10 mm (3/8 in) x 8 m (25 ft) maximum length airline. Connect the tool to the air supply as shown in Figure 1. Do not connect the tool to the airline system without an easily accessible air shut off valve. It is strongly recommended that an air filter, regulator and lubricator (FRL) be used as shown in Figure 1as this will supply clean, lubricated air at the correct pressure to the tool. In any case appropriate air pressure regulators shall be used at all times while operating this tool where the supply pressure exceeds the marked maximum of the tool. Details of such equipment can be obtained for your tool distributor. If such equipment is not used, the tool should be manually lubricated. To manually lubricate the tool, disconnect the airline and put 2 to 3 drops of suitable pneumatic motor lubricating oil such as 3M™ Air Tool Lubricant PN 20451, Fuji Kosan
3M™ 5 in & 6 in Random Orbital Sander | 4 | Revision 051210 |