LUBRICATION
Where Used | ARO Part # | Description |
Air Motor | 29665 | 1 qt. Spindle Oil |
‘‘O” Rings & Lip Seals | 36460 | 4 oz. Stringy |
|
| Lubricant |
Gears and Bearings | 33153 | 5 lb. ‘‘EP” – NLGI |
M10
122
Do not mark any nonmetallic surface on this tool with customer identification codes. Such actions could affect tool performance.
MAIN LINES 3 TIMES
AIR TOOL INLET SIZE
#1 Grease |
Always use an air line lubricator with these tools. We recommend the following
ARO Model
Every 8 hours of tool operation – Fill lubricator
TO
AIR
SYSTEM
TO
AIR
TOOL
LUBRICATOR
REGULATOR
FILTER
reservoir of recommended F.R.L. with spindle oil (29665). If an in line or air line lubricator is not used, apply several drops of spindle oil (29665) in air inlet.
After each 160 hours of tool operation, Flush tool with a solution of three (3) parts cleaning solvent to one (1) part spindle oil.
BRANCH LINE 2 TIMES
AIR TOOL INLET SIZE
DRAIN REGULARLY | COMPRESSOR |
|
(Dwg.
3