FEATURES
KNOW YOUR SCREWDRIVER
See Figure 1.
The safe use of this product requires an understanding of the information on the tool and in this operator’s manual as well as a knowledge of the project you are attempting. Before use of this product, familiarize yourself with all operating features and safety rules.
DIRECTION OF ROTATION SELECTOR
(FORWARD/REVERSE/center lock)
Your screwdriver has a direction of rotation (forward/ reverse/center lock) selector located above the switch trigger for changing the direction of bit rotation. Setting the switch trigger in the OFF (center lock) position helps reduce the possibility of accidental starting when not in use.
LED WORKLIGHT
The screwdriver has a
SPEEDLOAD +™ SYSTEM
Your screwdriver has the SPEEDLOAD +™ SYSTEM, the fastest and most convenient way to change any 1/4 in. hex shank bits.
TORQUE ADJUSTMENT RING
Your screwdriver has a
ASSEMBLY
UNPACKING
This product has been shipped completely assembled.
nCarefully remove the product and any accessories from the box. Make sure that all items listed in the packing list are included.
nInspect the product carefully to make sure no breakage or damage occurred during shipping.
nDo not discard the packing material until you have care- fully inspected and satisfactorily operated the product.
nIf any parts are damaged or missing, please call
PACKING LIST
Screwdriver
Bit Set
Tool Bag
Charger
Operator’s Manual
WARNING:
If any parts are damaged or missing do not operate this product until the parts are replaced. Failure to heed this warning could result in serious personal injury.
WARNING:
Do not attempt to modify this product or create acces- sories not recommended for use with this product. Any such alteration or modification is misuse and could result in a hazardous condition leading to possible serious personal injury.
WARNING:
To prevent accidental starting that could cause serious personal injury, always remove the battery pack from the product when assembling parts.