Ryobi HP24 specifications Features, Know Your Screwdriver, Switch, Input Jack

Page 6

FEATURES

KNOW YOUR SCREWDRIVER

See Figure 1.

Before attempting to use your screwdriver, familiarize yourself with all operating features and safety requirements.

WARNING:

Carefully read through this entire operator's manual before using your new screwdriver. Pay close attention to the Rules For Safe Operation, Warnings and Cautions. If you use your screwdriver properly and only for what it is intended, you will enjoy years of safe, reliable service.

If any parts are damaged or missing, please call 1-800- 525-2579 for assistance.

SWITCH

Your screwdriver is equipped with a rocker type switch which turns your screwdriver ON and OFF. This switch also controls the forward and reverse feature. For driving screws, depress front side of switch. For removing screws, depress back side of switch.

WARNING:

Do not allow familiarity with your screwdriver to make you careless. Remember that a careless fraction of a second is sufficient to inflict severe injury.

WARNING:

If any parts are missing, do not operate your screwdriver until the missing parts are replaced. Failure to do so could result in possible serious personal injury.

SWITCH

(0N/OFF) REVERSE (FORWARD/REVERSE)

FFORWARD

TORQUE

ADJUSTMENT CAP

20

 

 

18

 

 

16

 

 

14

SCREWDRIVER

 

BIT (INCLUDED)

 

COLLET

INPUT

 

JACK

Fig. 1

 

WARNING:

The operation of any power tool can result in foreign objects being thrown into your eyes, which can result in severe eye damage. Before beginning power tool operation, always wear safety goggles or safety glasses with side shields and a full face shield when needed. We recommend Wide Vision Safety Mask for use over eyeglasses or standard safety glasses with side shields. Always use eye protection which is marked to comply with ANSI Z871.1.

Page 6

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Save this Manual for Future Reference Thank YOU for Buying a Ryobi ScrewdriverTable of Contents General Safety RulesSpecific Safety Rules Tool Use and CareImportant Safety Instructions for Charger Symbols Symbol MeaningSymbol Name DESIGNATION/EXPLANATION Know Your Screwdriver FeaturesSwitch Input JackTo Charge OperationCharging Your Screwdriver ColletTo Adjust Torque MaintenanceAdjustable Torque Clutch Increase Torque Arrow Decrease Torque Adjustment CAPBattery Removal Battery REMOVAL, Preparation for RECY- ClingBatteries Operators Manual 2.4 Volt Screwdriver Model HP24

HP24 specifications

The Ryobi HP24 is an impressive addition to Ryobi's lineup of high-performance power tools, designed for both professionals and DIY enthusiasts. This product stands out due to its robust build quality and innovative features that enhance efficiency and ease of use.

One of the key features of the HP24 is its powerful motor, delivering exceptional performance in a compact design. The motor is engineered to provide a high power-to-weight ratio, ensuring users can complete their tasks with maximum efficiency. The tool's ergonomic design reduces user fatigue during extended use, allowing for longer work sessions without discomfort.

The HP24 is equipped with advanced brushless motor technology, which not only extends the life of the tool but also increases runtime compared to traditional brushed motors. This technology optimizes power consumption while delivering consistent torque and performance, making it suitable for various applications including drilling, screwing, and fastening.

Another notable aspect of the Ryobi HP24 is its versatile speed settings. The tool features multiple speed and torque settings, enabling users to tailor their performance to the specific material and task at hand. This flexibility ensures that whether tackling hardwood or soft materials, users have the optimal settings for the best results.

In addition to these capabilities, the HP24 also features a keyless chuck for swift bit changes, allowing users to switch between different drill bits quickly and efficiently without the need for additional tools. Moreover, its built-in LED work light illuminates dark or confined spaces, ensuring users can work with precision even in less than ideal lighting conditions.

Durability is another hallmark of the HP24. The tool is designed to withstand the rigors of regular use, making it a reliable choice for both professional contractors and weekend warriors alike. Its rugged exterior and quality materials contribute to its long lifespan, ensuring it remains a staple in any tool collection for years to come.

Overall, the Ryobi HP24 combines power, precision, and durability in a versatile and user-friendly package, making it an essential tool for anyone looking to tackle a wide array of tasks effectively. Its advanced technology, comfortable design, and thoughtful features set it apart in the competitive market of power tools.
Top Page Image Contents