Makita 6710DW instruction

Installing or removing battery cartridge

0 Always switch off the tool before insertion or removal of the battery cartridge.

0 To remove the battery cartridge, pull out the set plate on the tool and grasp both sides of the cartridge while withdrawing it from the barrel.

.To insert the battery cartridge, align the tongue on the battery cartridge with the groove in the housing and slip it into place. Snap the set plate back into place. Be sure to close the set plate fully before using the tool.

0 Do not use force when inserting the battery cartridge.

If the cartridge does not slide in easily, it is not being inserted correctly.

Charging

Plug the fast charger into your power source. Insert the battery cartridge so that the plus and minus terminals on the bat- tery cartridge are on the same sides as their respective markings on the fast charger. In- sert the cartridge fully into the port so that it rests on the charger port floor.

The charging light will come on and charg- ing will begin. If the charging light does not come on, press the reset button. If the

charging light goes out within 10 seconds even after pressingthe reset button a couple of times, the battery cartridge is dead. (CAUTION: Wait for more than 5 seconds after the charging light goes out to press the reset button again.) Replace it with a new one. When the charging light goes out after about one hour, you may remove the fully charged battery cartridge. After charging, unplug the charger from the power source.

CAUTION :

0 Your new battery cartridge is not charged. You will need to charge it before use.

0 If you try to charge a cartridge from a just-operatedtool, sometimes the charging light will not come on. If this occurs, let the cartridge cool off for a while. Then re-insert it and try to charge it once more.

0 When you charge a new battery cartridge or a battery cartridge which has not been used for a long period, it may not accept a full charge. This is a normal condition and does not indicate a problem. You can recharge the battery cartridge fully after discharging it almost completely a couple of times.

0 If you wish to charge two battery cartridges, allow 15 minutes betweenchargings on the fast charger.

6710D, 6710DW specifications

The Makita 6710DW and 6710D are versatile, powerful, and compact electric screwdrivers designed for a wide range of applications, making them essential tools for both professionals and DIY enthusiasts. These models come equipped with features that enhance performance, efficiency, and user comfort.

One of the standout features of the Makita 6710 series is its lightweight design. Weighing in at just over two pounds, these screwdrivers are easy to handle, allowing users to maneuver them in tight spaces without experiencing fatigue. The compactness of these models makes them ideal for tasks such as assembling furniture, installing cabinets, or working on electronic devices.

Both 6710DW and 6710D come with a robust 4.0 Amp motor that delivers high power output, ensuring that screws can be driven into tough materials with ease. Additionally, the screwdrivers offer a no-load speed of up to 600 RPM, which allows for rapid screw driving and improved productivity. Equipped with a variable speed control trigger, users can adjust the speed according to their specific requirements, giving them precise control over their work.

A key technology in these models is the built-in reverse function, allowing users to quickly back out screws without the need for additional tools. The ergonomic grip design reduces hand fatigue during extended use, enhancing overall comfort. Furthermore, the rubberized soft grip combined with the lightweight construction contributes to better handling and reduced vibration.

Both models are equipped with a 1/4-inch hex shank that accepts various screwdriver bits, making them compatible with a wide range of screw types. This versatility is complemented by the LED work light, which illuminates dark work areas, improving accuracy and visibility when needed.

In terms of durability, the Makita 6710DW and 6710D are constructed with high-quality materials that ensure longevity and reliability. The built-in overload protection feature prevents motor burnout, extending the tool's lifespan and minimizing maintenance costs.

Overall, the Makita 6710DW and 6710D electric screwdrivers stand out for their powerful performance, user-friendly design, and innovative features. Whether used in professional settings or for home projects, these tools deliver efficiency and reliability, making them an excellent addition to any toolkit.