Parkside PAS 3.6 A1 manual Original ancillaries / accessories, Changing the direction of rotation

9.

Original ancillaries / accessories

Use only the ancillaries and accessories that are detailed in the operating instructions. The use of ancillaries and ac- cessories other than those recommended in the operating instructions could lead to an increased risk of personal injury for you.

Before first use

Charging the rechargeable battery on the device (see Fig. D)

Note: The battery is supplied partially charged. Charge the battery for at least three hours before first use. You can charge the Li-Ion battery at any time without risk of shortening battery life. Interrupt- ing the charging process does not damage the battery.

Starting the charging process:

Connect the mains adapter 10 to a 230 - 240 V~ 50 Hz mains socket.

Connect the mains adapter 10 to the charging socket on the device 5 .

The rechargeable battery is charged when the battery indicator 3 changes from red to green.

Ending the charging process: Disconnect the mains adapter 10 from the mains socket.

Disconnect the mains adapter 10 from the charging socket on the device 5 .

Changing the bits / screwdriver bit inserts

Insertion:

Insert the bit directly into the tool holder 9 .

Preparing the tool for use

Switching on / off the cordless screwdriver

Switching on:

To start the appliance squeeze on the ON / OFF switch 7 and then keep it pressed down.

Switching off:

To stop the appliance, release the ON / OFF switch 7 .

Changing the direction of rotation

Clockwise:

Slide the direction of rotation switch 1 to the left.

Press the ON / OFF switch 7 . The direction indicator (clockwise) 2 illuminates. You can now screw in the screws.

Switching on / off the

LED lights 8

Switching on:

Press the ON / OFF switch (LED lights) 6 and keep it pressed.