Ingersoll-Rand 8655-B()-(), 8656-B()-() manual AIR and Lube Requirements, Recommended Lubricants

Page 6

AIR AND LUBE REQUIREMENTS

FOR LUBRICATION OF

GEARING ASSEMBLY

FOR LUBRICATION OF

GEARING ASSEMBLY

LUBRICATION POINTS

(GREASE FITTING LOCATIONS)

-FOR LUBRICATION OF LEAD SCREW AND LEAD SCREW NUT

NOTE: MUST ALWAYS BE 1/2

TO 2/3 FULL OF GREASE

Air pressure of 90 p.s.i.g. (6.2 bars) at the air inlet of the tool is re- quired for maximum motor efficiency. An air regulator should be’ installed to maintain this pressure when the tool is in operation.

ARO will not guarantee directional response when the pressure drops below 60 pounds (operating) at the air inlet of the tool, or an oiler/filter is not used.

Filtered and oiled air will allow the tool to operate more efficiently and yield a longer life to operating parts and mechanisms. A line filter capable of filtering particles larger than 50 microns should be used with a line oiler.

A Filter/Regulator/Lubricator (F.R.L.) assembly is recommended for use with this air tool. The capacity of the individual Filter-Regu- lator-Lubricator is adequate to provide clean (40 micron), oiled and regulated air for the tool. See page 18 for recommended F- R-L systems.

RECOMMENDED HOSE SIZE: See page 18 for recommended power air inlet systems.

Inject grease (40036-1) - 2 to 3 strokes - thru all grease fittings after each 40 hours of operation, or as experience indicates. Cav- ity of housing (45443) and cavity of adjusting nut (45444) should be kept 1/2 to 2/3 full of grease (40036-1). When assembling lead screw and lead nut to tool, lubricate internal threads of lead nut and threads on lead screw liberally with grease (40036-1) and fill cavities of housing and adjusting nut from 1/2 to 2/3 full.

RECOMMENDED LUBRICANTS:

MOTOR: Spindle oil 29665, 1 qt. (.9 liter) or equivalent type 1 light oil. Consult manufacturer of air line lubricator used to insure equivalent oil used is compatible with construction of lubrica- tor bowl.

LEAD SCREW, GEARS, BEARINGS, ETC.: Grease 400361,1 lb. (.45 kg) container, or equivalent grade containing molyb- denum disulfides.

“0” RING: Lubricant 36460, 4 oz. (113 g) tube.

PART NUMBER

WHERE USED

 

 

 

 

 

 

DESCRIPTION

 

 

 

 

29665

AIR

MOTOR

A HIGH QUALITY

LIGHT

TURBINE

OR SPINDLE

OIL, RUST

INHIBITED,

WITH

A VISCOSITY

OF 100-150 S.U.S. AT

 

 

 

100” F. OIL IS COMPATIBLE

WITH

POLYCARBONATE

TYPE

AIR

LINE

LUBRICATOR BOWLS.

40036-1

GEARS

& BEARINGS

AHlGH QUALlTY

“EP”EXTREME

PRESSURE

MOLYBDENUM

GREASE

SUlTABLE

FOR CLUTCH

APPLICATIONS,

 

 

 

NLGI NO. 1, FREE OF CORROSIVE MATTER AND FILLERS, WITH A VISCOSITY OF 500-700 S.U.S. AT 100” F.

36460

“0” RINGS & LIP SEALS

A STRINGY LUBRICANT

FOR RUBBER

SEALS,

WITH

GOOD ADHESIVE

QUALITIES.

 

6

Image 6
Contents Tapper General Description and Operation Second duration for most applicationsGeneral Description and Operation SET-UP Procedure Reassembly Lead NUT Tension AdjustmentAIR and Lube Requirements Recommended LubricantsModel Identification Basic Number Dash Number lndicates Lead or PitchPower Unit Section MaintenanceDisassembly and Reassembly of Tool Valve SectionTypical Cross Section of Tool Disassembly Valve SectionCross Section Thru Valves Manifold and Valve Assembly Housing and Valve AssemblyGearing Assembly Identification by Sight PowerChart Drive GearingPower Unit Section Auxiliary GearingMotor Assembly DisassemblyMotor Housing and AIR Tubes Spindle and Lead Screw Section Spindle and Lead Screw Section Recommended Power AIR Inlet System Male Thread ConnectorShown below is the Same System in Schematic Form NO-HOLE Sensor System Tool is Back CONNECTIONS32Tool is Back and NO-HOLE Sensor Combined Connections Accessories MotorDual Spindle Section ReassemblyDual Spindle Attachmant Assembly Recommended Method for Holding Drills in SpindlesMounting the Dual Spindle Attachmant to the Lead Screw TAP ACCESSORIESM104 Dual Spindle Attachment AssemblyMounting the Dual Spindle Attachment to the Lead Screw TAP Exhaust Exit Trouble Shooting Soluble Table of Speeds Fractional Size Taps Revolutions PER MinuteCommon TAP Problems IAE

8655-B()-(), 8657-B()-(), 8656-B()-(), 8658-B()-() and 8659-B()-() specifications

The Ingersoll-Rand 8658-B(), 8659-B(), 8656-B(), 8657-B(), and 8655-B() series are advanced air compressors designed to meet a wide range of industrial needs. Renowned for their reliability, efficiency, and robust performance, these models are equipped with state-of-the-art technologies that make them suitable for various applications, including manufacturing, automotive, and construction industries.

One of the standout features of the Ingersoll-Rand 8658-B() and 8659-B() models is their high-efficiency rotary screw design. This design not only maximizes performance but also minimizes energy consumption. The compressors are designed to operate at lower temperatures, which reduces the wear and tear on components, thereby extending their lifespan. Moreover, these models incorporate innovative cooling technology to maintain optimal operating temperatures, ensuring consistent performance even in challenging environments.

The 8656-B() and 8657-B() compressors offer advanced control systems that enhance precision and user-friendliness. Operators can easily monitor and adjust pressure settings, allowing for tailored performance according to specific needs. These models feature a user-friendly interface that provides real-time data on pressure levels, temperature, and operational status, enabling quick decisions and efficient troubleshooting.

Additionally, all five models in this series prioritize noise reduction, making them ideal for settings where a quieter operation is essential. The compressors possess sound-dampening technology that minimizes operational noise, which is especially beneficial in urban or noise-sensitive environments.

Durability is a key characteristic of the Ingersoll-Rand 8658-B(), 8659-B(), 8656-B(), 8657-B(), and 8655-B() models. They are constructed from high-quality materials designed to withstand rigorous use and harsh conditions. This robust construction ensures that these compressors are not only capable of handling heavy workloads but are also resistant to corrosion, further enhancing their longevity.

In summary, the Ingersoll-Rand 8658-B(), 8659-B(), 8656-B(), 8657-B(), and 8655-B() series of air compressors offer a powerful combination of efficiency, durability, and advanced technology. Their rotary screw design, user-friendly control systems, noise reduction capabilities, and robust construction make them a top choice for a variety of industrial applications, ensuring reliable performance and satisfaction for operators across the globe.