OPERATOR’S MANUAL | 636103 |
|
|
INCLUDING: OPERATION, INSTALLATION & MAINTENANCE | RELEASED: |
INCLUDE MANUAL: 636027 HYDRAULIC COUPLERS AND ADAPTERS (PN 97999183) | REVISED: |
636103 | (REV. L) |
| |
|
|
LIGHT WEIGHT PISTOL GRIP
READ THIS MANUAL CAREFULLY BEFORE INSTALLING,
OPERATING OR SERVICING THIS EQUIPMENT.
It is the responsibility of the employer to place this information in the hands of the operator. Keep for future reference.
WARNING
Whip Hose must not be used on this control han
| dle in place of the tube and nozzle assembly. Pressures devel |
| |
| oped are too great and may burst hose causing accidental |
| |
| injection. |
| |
|
|
| |
| SERVICE KITS |
|
|
• | Use only genuine AROR replacement parts to assure compatible |
| |
• | pressure rating and longest service life. |
| |
71139 for repair of control handle. | 636103 | ||
|
|
| |
OPERATION
There are no complicated adjustments and it is easy to clean and ser vice. It uses line pressure for normal lubrication, but for tough fittings, operator merely squeezes (14) handle several times until fitting opens. A maximum of 10,000 p.s.i. (689 bar) can be reached by squeezing the (14) handle several times.
When removing the control handle from a grease fitting, do not pull the hydraulic coupler straight off of the fitting. Move the control handle so that the 636028 hydraulic coupler is at an angle of 30_ to 45_ from the centerline of the fitting. Doing this will ease the removal of the coupler.
MAXIMUM INLET PRESSURE 7500 P.S.I. (517 BAR)
WARNING: HIGH PRESSURE DEVICE
IMPROPER USAGE OF EQUIPMENT COULD RESULT IN SERIOUS INJURY.
THE POSSIBILITY OF INJECTION INTO THE FLESH IS A POTENTIAL HAZARD. NEVER ALLOW ANY PART OF THE HUMAN BODY TO COME IN FRONT OF OR IN DIRECT CONTACT WITH THE MATERIAL OUTLET.
AN INJECTION INJURY CAN BE SERIOUS! IF INJECTION SHOULD OCCUR, CONTACT A
QUALIFIED PHYSICIAN FOR IMMEDIATE TREATMENT OF SUCH INJURIES.
INGERSOLL-RAND COMPANY
P.O. BOX 151 D ONE ARO CENTER D BRYAN, OHIO 435060151
&(419)