Bahco BE-6990-AH Use, Inserting blades, Application of the sliding T-handle, Setting the torque

Use

If the screwdriver is turned in the direction of tightening, you hear a click when the correct torque has been reached. When undoing screws, there is no torque limit.

Inserting blades

Blades with a 1/4" male hexagon drive can be inserted. Blade profiles such as slotted, PHILLIPS, POZIDRIV and hexagon can be selected.

Application of the sliding T-handle

In order to apply the required torque with less effort, the self-locking T-handle can be inserted into the 1/4" female square at the end of the handle.

When the rod has been pushed through the insert, the screwdriver is secured to the T-handle.

Setting the torque

The torque can be set at the end of the handle using a 5 mm hexagon key. Torque is increased by turning clockwise and decreased by turning anti-clockwise.

Adjustments can be made easily and accurately with the torque calibration rig as illustrated opposite.

Accuracy: ± 6%

Nm

1

2

5 mm

+ Nm

– Nm

Nm

– +

✔

+

Product code	EAN code	Nm		mm
	731415+
BE-6990-AH	1848651	0,5 – 15 1/4"	1/4" 5 mm	32 x 150	335	1

www.bahco.com

MS7058ENG