ASSEMBLY
WARNING:
Always remove battery pack from your saw when you are assembling parts, making adjustments, assembling or removing blades, cleaning, or when not in use. Removing battery pack will prevent accidental starting that could cause serious personal injury.
TO REMOVE / ATTACH BATTERY PACK
See Figure 2.
TO REMOVE:
■Locate latches on side of battery pack and depress both sides to release battery pack from your saw.
■Remove battery pack from your saw.
TO ATTACH:
■Place the battery pack in your saw aligning raised rib on battery pack with groove in saw's battery port. See Figure 2.
■Make sure the latches on each side of the battery pack snap into place and battery pack is secured to saw before beginning operation.
BATTERY PORT
DEPRESS LATCH
TO RELEASE
BATTERY PACK
BATTERY
PACK
TO INSTALL SAW BLADE
See Figure 3.
■Remove battery pack. See Figure 2.
WARNING:
Failure to remove battery pack from saw could result in accidental starting causing possible serious personal injury.
■Lift blade clamp lock / release lever located on side of saw.
■Insert saw blade between blade clamp and saw bar.
■Lock blade clamp lever.
■Replace battery pack.
TO INSTALL /
TO RELEASE
BLADE CLAMP
LOCK / RELEASE LEVER
BLADE CLAMP
BLADE
TO LOCK
BLADE SHOWN |
|
CORRECT IN SAW BAR | Fig. 3 |
LATCH | Fig. 2 |
|
Page 8