Screw (4)
Blade
Adjusting Shoe
Use the Adjustable Bottom Plate (1) to determine the depth of your cut. Position the Shoe close to the Rubber Sleeve (3) for a deeper cut, further out for a shallower cut.
Rubber Sleeve (3)
Adjustable Bottom Plate (1) 
Saw Blade 
Hex Screws (2)
1.Loosen Hex Screws (2) with supplied Hex Key Wrench.
2.Position the Adjustable Bottom Plate (1) to the desired position.
3.Tighten Hex Screws (2).
Operation
Operational Precautions
1.Check the Saw Blade to make sure it does not have any missing teeth or cracks. Do not use a damaged Saw Blade.
2.Check that there is enough space under and behind the workpiece for the reciprocation blade. Be sure that you will not be cutting through any electrical wires or your workbench.
3.Do not put
4.Never attempt to remove material stuck in the moving parts of the saw while the saw in running and plugged in.
SKU 42597 | Page 5 |