Makita SR1800 instruction manual Maintenance, USE of Nozzle Assembly, Attaching Nozzle Assembly

USE OF NOZZLE ASSEMBLY

Use of the special nozzle assembly (acces- sory attachment) will prevent chip scatter, making for a clean work area.

\	Nozzle assembly
	Fig. 1(

ATTACHING NOZZLE ASSEMBLY

The nozzle assembly may be attached after the chip cover on the tool body is removed. When slipping on the assembly, fit the pin on it into the rear cover hole. Use the chip cover screws to fasten it in piace.

Fig. 11

MAINTENANCE

Caibon brushes

Replace carbon brushes when they wear down to about 5 mm (YIS") or sparking

will occur.

Both brushes should be changed a t the same time.

ACCESSORIES CAUTION: The use of any other accessories not specified in this manual might be hazardous.

0 Replacement blades	0 Planer blades	0 Guide rule
Width! 8 2 mm !3-1/4")	(Material:.- Tunasten-carbide)	Part No. 164371-0
Part No. 731001-4	Width. 8 2 mm-(3-1/4")

0 Blade gauge assembly	0 Sharpening holder assembly	Dressing stone
Part No. 123062-2	Part No. 123004 - 6	Part No. 741802 - 2

0 Planer stand	0 Nozzle assembly	0 Socket wrench	0 Screwdriver
Part No. 122125-1	Part No. 122194-2	Part No. 782209-3	Part No. 783002-8
'i		!	---.	--.

em-F#e*.,- :8	0 Hex flange hd. bolt
	Part No. 2 5 1 6 0 9 - 3
	4 4

6